flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Brick Industry Assn. study finds brick buildings cost less than precast, metal, and glass

Codes and Standards

Brick Industry Assn. study finds brick buildings cost less than precast, metal, and glass

The study compares costs in five categories of construction.


By Peter Fabris, Contributing Editor | March 22, 2017

Pixabay Public Domain

A new Brick Industry Association (BIA) study found that brick with Concrete Masonry Units (CMUs) costs less than precast concrete, metal panel curtain wall, and glass panel curtain wall systems.

The study compared total construction costs in five categories: three-story office building, three-story apartment building, five-to 10-story office building, four- to eight-story hospital, and a six-story dorm. The independent study was conducted by RSMeans for the BIA, according to a news release.

Comparisons include exterior installation and finish systems (EIFS) with metal studs (lowest cost), brick with steel studs, manufactured stone with steel studs, brick with CMU, precast concrete, metal panel curtain wall and glass panel curtain wall. For example, a three-story office building using manufactured stone with steel studs costs 2.7% more than brick with steel studs. In that application, precast concrete costs 2.7% more than brick with CMU, and metal panel curtain wall costs 13.1% more than brick with CMU.

"National averages show brick costs less than perceived," said Ray Leonhard, BIA's president and CEO. "Since it's a non-flammable and non-combustible material, clay brick also offers superior fire resistance with a minimum one-hour fire rating."

Related Stories

| Jun 1, 2012

New BD+C University Course on Insulated Metal Panels available

By completing this course, you earn 1.0 HSW/SD AIA Learning Units.

| May 31, 2012

Proposed change in Michigan’s building code would hurt innovation, say critics

Legislation pending before the Michigan Senate would change the law that calls for building codes to be updated every three years to require an update only every six years.

| May 31, 2012

Natural gas industry opposes federal carbon-neutral construction rule

The natural gas industry and some allies are working to block a federal green building rule that was expected to be a national model for carbon-neutral construction.

| May 31, 2012

Lawsuits push the legal boundaries of green building definition

This article explores some legal issues stemming from lawsuits in which plaintiffs have charged developers with not delivering on a promised level of sustainability.  

| May 31, 2012

ANSI approves Green Building Initiative’s design standard

The Green Building Initiative (GBI), a Portland, Ore. nonprofit organization, has had its new consensus-based standard for the design, construction, and operations of environmentally friendly buildings approved by the American National Standards Institute (ANSI).

| May 31, 2012

USGBC testing Minnesota buildings to see if they are living up to LEED standards

The Minnesota chapter of the U.S. Green Building Council (USGBC) has teamed up with EnergyPrint, a St. Paul, Minn. energy consulting firm, to study the energy and water use of more than 150 buildings in the state that have LEED certification.

| May 29, 2012

Reconstruction Awards Entry Information

Download a PDF of the Entry Information at the bottom of this page.

| May 25, 2012

Major retail chains welcome LEED Volume option

Large national chains such as Starbucks, Marriott, Verizon, and Kohl’s are welcoming the LEED Volume Program that enables them to batch certify similar projects.

| May 25, 2012

Alaska’s okay of gravel aggregate with naturally occurring asbestos opens up development

Some long-delayed projects in the Upper Kobuk region of Alaska may now move forward thanks to legislation that allows construction in areas that have naturally occurring asbestos.

boombox1
boombox2
native1

More In Category




Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021