The Boston City Council recently approved a mandate for major emissions cuts for large buildings.
The legislation is one of only a few of its kind in the country and will apply to buildings that are 20,000 sf or larger. That amounts to about 4% of the buildings in the city.
About 2,200 buildings that are 35,000 sf or larger will have to start meeting emissions caps in 2025. Another 1,300 buildings —20,000 sf or larger—must start meeting emissions caps by 2030. The ordinance aims to cut all those buildings’ emissions in half by the end of the decade and completely by 2050. A review board can receive input from financial experts and energy providers for recommendations on changes to the rules and on hardship compliance plans.
Acting Mayor Kim Janey is expected to soon sign the ordinance into law. It was modeled on similar measures in New York, St. Louis, and Washington, D.C.
Related Stories
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
