Losing a tool or piece of equipment is frustrating, but it can also be expensive. Between the cost of replacing a tool if it isn’t found and the time lost looking for a misplaced tool, a company’s bottom line can be significantly affected. In fact, it is estimated that a single lost tool on a jobsite can increase the time spent completing a task by over 30%. And, according to Milwaukee Tool Senior Product Manager, Steve Matson, over the length of a large project this increased time spent completing a task can add up to tens of thousands of dollars in wasted labor.
That’s where the Tick comes in, a Bluetooth tool and equipment tracker that can easily be attached and hidden on any tool or piece of equipment. The Tick pairs with Milwaukee’s One-Key app and, once paired, tool records and locations are updated when any device with the One-Key app comes within 100 feet. Regardless of whether the device with One-Key has the app open or not, the location updates are transmitted, allowing users to pinpoint the missing tool.
The Tick has a low profile and flat back that, Milwaukee claims, allows it to be attached to anything via glue, screw, rivet, or strap. Its round shape allows it to be easily hidden out of sight on, for example, the underside of a ladder or a miter saw stand.
Because jobsites are not always the most hospitable of places, the Tick has a water and dust-tight enclosure to protect internal components and UV rated plastics to keep the device from becoming brittle when exposed to extended periods of direct sunlight. The tracker also uses a rugged electronics housing that can stand up to high vibration and impact.
The Tick will be available in February of this year in a 1-pack for $29, a 4-pack for $99, a 10-pack for $219, and a 50-pack from $999.
Related Stories
Glass and Glazing | Oct 13, 2017
Toronto’s CN Tower improves views with floor-to-ceiling dynamic glass windows
The glass darkens in proportion to the sun’s intensity to produce a reduction of heat and glare inside the building.
Glass and Glazing | Oct 12, 2017
Glass installation depicts Chicago landscape at O’Hare Terminal 5 expansion
The art was inspired by NASA satellite imagery.
Products and Materials | Sep 18, 2017
Product roundup: Paints + coatings
Duranar Sunstorm from PPG, Fluropon from Valspar, and Extreme Cover from Sherwin-WIlliams are just three of the 12 products highlighted in BD+C's September Product Roundup.
Sponsored | Products and Materials | Sep 15, 2017
Creating a movement: How Mamava, Konrad Prefab and ALPOLIC partnered to change the culture of breastfeeding
Since its conception in 2006, the Mamava lactation pod has undergone several changes in design.
Lighting | Sep 1, 2017
Industrial lighting system converts blue light to green, yellow
The SpectraLoc LED blue-spectrum high-bay fixture converts harmful blue light under 500 nanometers to benign green and yellow light.
Products and Materials | Aug 30, 2017
Emergency communications system keeps university students and staff safe
The system provides advanced fire detection and notification, and allows for emergency messages to be transmitted in campus buildings through fire alarm speaker devices.
Products and Materials | Aug 30, 2017
Insulated wall system cuts down installation time
ProGUARD DP is a combined system cuts installation time down to one-third that of traditional wall systems.
Products and Materials | Aug 29, 2017
Product roundup: 12 inventive ceiling + acoustical systems
EchoStar Panels from Kirei, EZ Stab from CertainTeed Ceilings, and Integrity 4200 from Rockfon are three of the products included in BD+C's August Product Roundup.
Products and Materials | Aug 17, 2017
Scuff-resistant paint is tailor-made for high-traffic commercial spaces
SCUFF-X provides the level of scuff-resistance of two-component coatings.
Products and Materials | Jul 24, 2017
Nu-Wood brackets give 110-year-old hotel another level of distinction
One of the goals during the hotel’s 2014 and 2015 refurbishment was to create a low maintenance exterior.