Two bills in the Maryland House of Representatives that would restrict the use of wood-frame construction are getting harsh criticism from the timber industry and the design and construction community.
Maryland House Bill 1311 would prohibit a multifamily dwelling from being constructed using wood-frame construction in communities exceeding a specified population density. A similar bill has been introduced in Maryland’s Senate.
American Wood Council (AWC) Northeast Regional Manager Matt Hunter, and representatives from building owners, architecture, development, and engineering, all testified against the bill.
“These bills would circumvent the extensive effort architects, engineers, and building code officials put into the process to regularly update the national model building codes,” Hunter said. “The construction requirements of the model codes are developed by the International Code Council, and approved by building and fire officials from all over the country in a consensus process. Subsequently, Maryland adopts these model codes and requires each jurisdiction to use this building code.”
“The code establishes requirements such that all buildings have similar safety performance regardless of the materials from which they are constructed,” he continued. “There needs to be a realization that fires occur in buildings of all construction types and materials, and all buildings are affected by fire. In most instances it is the furnishings and contents brought into buildings that cause fires, so targeting wood construction in multi-family buildings is not going to improve occupant or firefighter life safety.”
Related Stories
Codes and Standards | Dec 11, 2018
Strict seismic building codes credited with minimizing damage in Alaskan earthquake
Magnitude 7.0 temblor cracked roads and collapsed road ramps, but buildings held up well.
Codes and Standards | Dec 7, 2018
Florida tops ABC’s 2018 Merit Shop Scorecard rankings
Michigan rose fastest after passing prevailing wage law.
Codes and Standards | Dec 6, 2018
North American steel yields lower GHG emissions than Chinese steel
North American construction steel saves about half of GHG emissions on building project.
Codes and Standards | Dec 5, 2018
Canadian retailer builds net-zero stores
Other chains also boost green efforts with PVs, EV charging stations.
Codes and Standards | Dec 4, 2018
Action on building codes would spur low-carbon cities
Faster retrofit cycles, increased energy-efficiency requirements for existing buildings needed.
Codes and Standards | Nov 30, 2018
Best solution to prevent California wildfire disasters: Stop building in places likely to burn
Approach would be unpopular as people attracted to stunning wooded landscapes.
Codes and Standards | Nov 29, 2018
USGBC and BRE form partnership
Two green standards groups will collaborate on standards, platforms, and research.
Codes and Standards | Nov 29, 2018
Parking garages in N.Y. State will have to be inspected every three years
Professional engineer must assess conditions.
Codes and Standards | Nov 28, 2018
To build water-efficient cities, water managers and urban planners must coordinate better
Lack of time and resources, and practitioners not in habit of working together hamper efforts.
Codes and Standards | Nov 27, 2018
AAMA updates specification for roller assemblies in sliding doors, and lift and slide doors
Last update was in 2015.