Over the past five years, energy efficiency policies and codes have been made more stringent in many countries around the world, but for these measures to succeed stronger enforcement is needed, according to a report by Navigant Research.
“Globally, governments and regulatory agencies have increased their focus on commercial buildings, which are large consumers of the world’s energy,” adds Krystal Maxwell, research associate with Navigant Research. “Europe is a leader among world regions in energy efficiency policy, with the most rigorous building codes, performance standards, labeling, and benchmarking, as well as some of the most aggressive greenhouse gas emissions reduction targets.”
Commercial buildings, as large consumers of the world’s energy, have become primary targets for global governments and regulatory agencies. Increased regulation of policies, codes, and benchmarking must be enforced for successful policy reform, however, Navigant says.
Influencing code reform are the actions that many countries have taken to reduce greenhouse gas (GHG) emissions targets. The U.K. has the most ambitious target: An 80% reduction by 2050, with the emission level of 1990 as the baseline. The U.S. is aiming for a 26-28% reduction by 2025 from 2005’s level.
Related Stories
| Feb 12, 2013
California resolves ADA inconsistencies with 2013 building code
The recently adopted 2013 California Building Code (CBC) revisions bring the state code in line with the federal Americans With Disabilities Act 2010.
| Feb 12, 2013
Bullitt Foundation says Living Building Challenge can only be met after code change
The 50,000 sf Bullitt Center in Seattle is being constructed to be the greenest, most energy-efficient commercial building in the world, and meet the ambitious goals of the Living Building Challenge.
| Feb 12, 2013
Tilt-Up Concrete Assn. offers technical advice on 2012 International Energy Code
The Tilt-Up Concrete Association (TCA) says it can be a major industry resource in helping designers adhere to the International Energy Conservation Code (IECC).
| Feb 8, 2013
WDMA releases national policy agenda for windows, doors, skylights
Document urges a regulatory stance that will support manufacturing, including favorable building codes and tax policy.
| Feb 6, 2013
Green-roofing bills approved by New Jersey's state Assembly
Two bills that would require installation of green and blue roofs on new government buildings received overwhelming approval from the state Assembly in New Jersey.
| Feb 6, 2013
BOMA favors voluntary energy benchmarking and disclosure, opposes mandates
The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
| Jan 31, 2013
Proposed ASHRAE legionellosis prevention standard open for third public comment
Changes to a proposed ASHRAE legionellosis prevention standard associated with building water systems are open for public comment.
