The Massachusetts Port Authority (Massport), the body that runs Boston’s Logan Airport, recently issued a series of documents for integrating BIM into new construction, substantial renovation, and major maintenance and improvement projects.
The release of the guidelines is part of the Massachusetts Integrated BIM Initiative, an effort that is evaluating the feasibility of establishing a single BIM protocol for all Massachusetts agencies and authorities. The documents include Guidelines for Vertical and Horizontal Construction, an Appendix A: BIM Uses Guideline, and a BIM Roadmap poster, which are available here.
The higher the estimated construction costs of a project, the higher the level of BIM required. The guidelines also apply to tenant alteration application projects.
Massport incorporated the 2014 Level of Development Specification published by the AIA and AGC into its guidelines. Prime designers and contractors will be required to designate BIM managers, who will work with Massport’s Design Technologies Integration Group to ensure that the BIM guidelines are followed throughout each phase of a project.
Related Stories
Codes and Standards | Feb 1, 2022
Biden Administration launches state, local coalition to boost building performance standards
Will focus on energy efficiency and electrification across the buildings sector.
Codes and Standards | Jan 26, 2022
Downtown digital twin to aid Las Vegas in setting policy priorities
Will be used to address energy use, emissions, traffic, parking, noise, and emergency management.
Codes and Standards | Jan 25, 2022
Modeling tool helps compare options for HVAC systems when little known about a building
Compares projected costs and energy usage for all HVAC systems and hot water consumption.
Codes and Standards | Jan 25, 2022
Critics slam proposed revamp of California’s solar net energy metering rate
Could make rooftop solar panels unaffordable for most customers.
Sponsored | Resiliency | Jan 24, 2022
Norshield Products Fortify Critical NYC Infrastructure
New York City has two very large buildings dedicated to answering the 911 calls of its five boroughs. With more than 11 million emergency calls annually, it makes perfect sense. The second of these buildings, the Public Safety Answering Center II (PSAC II) is located on a nine-acre parcel of land in the Bronx. It’s an imposing 450,000 square-foot structure—a 240-foot-wide by 240-foot-tall cube. The gleaming aluminum cube risesthe equivalent of 24 stories from behind a grassy berm, projecting the unlikely impression that it might actually be floating. Like most visually striking structures, the building has drawn as much scorn as it has admiration.
Sponsored | Resiliency | Jan 24, 2022
Blast Hazard Mitigation: Building Openings for Greater Safety and Security
Codes and Standards | Jan 24, 2022
N.Y. governor calls for ban on natural gas in new buildings
Action follows New York City’s ban.
Codes and Standards | Jan 19, 2022
EPA may expand product lineup that can earn WaterSense label
Would include systems that enhance water quality at the tap.
Codes and Standards | Jan 19, 2022
Canada’s Trudeau seeking building codes changes, net-zero emissions building strategy
Prime minister also wants net-zero electricity grid by 2035.
Codes and Standards | Jan 18, 2022
Greater emphasis on building materials needed to achieve net-zero carbon offices
Engineered wood, straw, and bamboo can be keys to achieving goal.