flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Batteries are the next step in raising sustainability standards

Codes and Standards

Batteries are the next step in raising sustainability standards

Battery technology will reduce electricity costs and promote a more stable, flexible grid.


By Peter Fabris, Contributing Editor | January 12, 2016
Batteries are the next step in raising sustainability standards

Courtesy Tesla

A California developer believes grid-connected batteries represent the next step in advancing electric efficiency standards on its development portfolio.

The Irvine Co. and Advanced Microgrid Solutions recently installed 16 Tesla PowerPack battery systems at an office tower. It was the first installation in what will be a fleet of Irvine Co. Hybrid-Electric Buildings that will be used for grid support by Southern California Edison. 

The hybrid-electric building, as an Irvine executive calls it, charges its battery system on off-peak hours and later discharges the battery during times of peak energy use. This reduces the energy drawn from the electricity grid during peak periods.

The result is lower electricity costs (10% savings or more) and a more stable and flexible electric grid. With large users drawing power from batteries during peak times, utilities can avoid starting additional power plants to serve peak loads, thereby reducing associated greenhouse-gas emissions.

Battery storage can also be combined with photovoltaic panels, providing additional cost savings and environmental benefits.

Related Stories

Codes and Standards | Jun 17, 2016

Feds publish framework for evaluating public-private partnerships

No single factor determines whether a project yields stronger benefit as a P3.  

AEC Tech | Jun 17, 2016

Driverless cars could soon start impacting commercial, retail project design

Offsite parking and more space for valet parking lines are among the foreseeable changes.

Codes and Standards | Jun 17, 2016

Bay State moves toward single BIM protocol on state projects

Massport’s guidelines a step forward for integrated BIM initiative.  

Multifamily Housing | Jun 14, 2016

San Francisco voters approve tougher affordability requirement on new housing development

Critics charge that the measure may backfire and actually reduce new affordable units.  

Concrete | Jun 13, 2016

American Concrete Institute releases new Guide to Shotcrete

Includes information on application procedures, testing.  

Healthcare Facilities | Jun 10, 2016

Top 10 health technology hazards include some influenced by space design

ECRI Institute’s annual list includes operational and workflow issues.  

Codes and Standards | Jun 9, 2016

Supreme Court ruling could aid developers on properties containing wetlands

Unanimous decision allows landowners to take regulatory decisions straight to court.

Green | Jun 8, 2016

TD Bank Group's renovated Toronto office is first WELL-Certified project under WELL v1

The newly renovated 25,000-sf space achieved gold-level status.

Concrete | Jun 7, 2016

Concrete Institute publishes document providing concrete curing guidance

New curing monitoring techniques included.  

Energy | Jun 7, 2016

Energy modeling payback typically as short as one to two months

Energy modeling is a ‘no-brainer—like checking MPG on a car’

boombox1
boombox2
native1

More In Category

Warehouses

California bill would limit where distribution centers can be built

A bill that passed the California legislature would limit where distribution centers can be located and impose other rules aimed at reducing air pollution and traffic. Assembly Bill 98 would tighten building standards for new warehouses and ban heavy diesel truck traffic next to sensitive sites including homes, schools, parks and nursing homes.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021