flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Automated tool assists in design of force transfer around openings

Codes and Standards

Automated tool assists in design of force transfer around openings

Engineered Wood Assn. offers free calculator and technical note.


By Peter Fabris, Contributing Editor | January 31, 2018

A new automated tool provides assistance in the design of force transfer around openings (FTAO).

The Engineered Wood Association developed the free tool that includes a calculator and Technical Note. The FTAO method of shear wall design provides structures with a more comprehensive lateral resistance design which otherwise omitted the sheathing around windows or other large openings, according to a news release by the association.

“The FTAO method used to be considered cumbersome and somewhat undefinable due to the lack of specificity in the design code,” said Jared S. Hensley, P.E., APA Engineered Wood Specialist. “Now we have a new tool that simplifies the structural design process and makes the FTAO method more approachable and more precise.”

The APA FTAO Calculator provides the required hold-down forces, tension strap forces, and wall sheathing capacity, and automatically completes the design check in the final step. It also provides shear wall deflection calculations for the 3- and 4-term deflection equation options.

Related Stories

| Mar 8, 2012

Green buildings more resilient than conventionally built structures

A new study by the U.S. Green Building Council (USGBC) and the University of Michigan’s Taubman College of Architecture and Urban Planning suggests that structures built to green standards can advance building resiliency.

| Mar 1, 2012

LEED Platinum standard likely to mean net-zero energy by 2018

As LEED standards continue to rise, the top level, LEED Platinum, will likely mean net-zero energy construction by 2018.

| Mar 1, 2012

EPA beefs up stormwater discharge rule from construction projects

The U.S. Environmental Protection Agency (EPA) has now finalized its 2012 construction general permit (CGP) that authorizes stormwater discharges from construction projects that disturb one or more acres of land in the areas where EPA is the permitting authority.

| Mar 1, 2012

Regulators investigate structural failures during construction of two Ohio casinos

Regulators with the Occupational Safety & Health Administration and the city of Cincinnati are investigatingthe collapse of the second floor of Cincinnati's Horseshoe Casino as workers were pouring concrete.

| Mar 1, 2012

Is your project too small for LEED? Consider other green standards

There are many other recognized national, state and local programs that offer a variety of best management practices and sustainable design, construction and operating strategies.

| Mar 1, 2012

California bill aims to cut costs for commercial building energy retrofits

A bill in the California Assembly would allow the state to pool together property owners’ energy-retrofit loans.

| Feb 29, 2012

Carvalho appointed Shawmut Safety Director

He has been a driving force behind multiple safety-orientated initiatives at Shawmut, including Safety Week, the creation of an online safety manual, and the implementation of a new safety reporting and tracking system. 

| Feb 23, 2012

Federal budget cuts put major building projects on hold

A plan to build the National Bio and Agro-Defense Facility in Kansas is among several major building projects in jeopardy after the Obama administration’s 2013 budget was unveiled. The budget would cut all construction spending for the facility.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021