The compilation ASTM Standards in Building Codescontains more than 1,300 ASTM construction specifications, practices and test methods, and is now available in DVD and online. The document contains the ASTM Building Codes compiled from the Annual Book of ASTM Standards.
These standards satisfy the international code requirements established by the International Code Council. According to ASTM, “ASTM Building Codes enable you to meet international code requirements; stay informed and remain competitive; specify the right material for the job; understand the significance and use of the standards; and speak a common language that the entire industry recognizes.”
ASTM Standards in Building Codes provides the latest versions of ASTM standards referenced by:
• The International Codes published by ICC®;
• National Building Code of Canada—National Research Council Canada;
• Uniform Plumbing Code and Uniform Mechanical Code—International Association of
Plumbing and Mechanical Officials;
• MASTERSPEC®;
• BSD SpecLink®;
• NFPA5000™ – Building Construction and Safety Code™;
• SPECTEXT® Master Guide Specifications;
• Green Standards: Federal Green Construction Guide for Specifiers, International Green
Construction Code (IgCC), Green Globes®;
• AWS: Structural Welding Code D1.1/D1M: 2010;
• UL Global Standards; and
• National Roofing Contractors Association (NRCA).
ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions.
Related Stories
| May 17, 2012
New standard for Structural Insulated Panels under development
ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.
| May 17, 2012
Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’
A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.
| May 17, 2012
California Governor orders new green standards on state buildings
California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.
| May 17, 2012
New Zealand stadium roof collapse blamed on snow, construction defects
Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.
| May 17, 2012
OSHA launches fall prevention campaign
The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.
| May 15, 2012
Suffolk selected for Rosenwald Elementary modernization project
The 314-student station elementary school will undergo extensive modernization.
| May 10, 2012
Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond
Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.
| May 10, 2012
Resilience should be considered a sustainability factor
Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.
