The compilation ASTM Standards in Building Codescontains more than 1,300 ASTM construction specifications, practices and test methods, and is now available in DVD and online. The document contains the ASTM Building Codes compiled from the Annual Book of ASTM Standards.
These standards satisfy the international code requirements established by the International Code Council. According to ASTM, “ASTM Building Codes enable you to meet international code requirements; stay informed and remain competitive; specify the right material for the job; understand the significance and use of the standards; and speak a common language that the entire industry recognizes.”
ASTM Standards in Building Codes provides the latest versions of ASTM standards referenced by:
• The International Codes published by ICC®;
• National Building Code of Canada—National Research Council Canada;
• Uniform Plumbing Code and Uniform Mechanical Code—International Association of
Plumbing and Mechanical Officials;
• MASTERSPEC®;
• BSD SpecLink®;
• NFPA5000™ – Building Construction and Safety Code™;
• SPECTEXT® Master Guide Specifications;
• Green Standards: Federal Green Construction Guide for Specifiers, International Green
Construction Code (IgCC), Green Globes®;
• AWS: Structural Welding Code D1.1/D1M: 2010;
• UL Global Standards; and
• National Roofing Contractors Association (NRCA).
ASTM standards are accepted and used in research and development, product testing, quality systems and commercial transactions.
Related Stories
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
Codes and Standards | Feb 24, 2017
Scant data hampering energy, water efficiency at sports venues
New NIBS report says baseline information needs further development.
Codes and Standards | Feb 22, 2017
Plans for WELL Building Standard include linkage with other green building standards
The planned updated version will be customizable for any building type.
Codes and Standards | Feb 21, 2017
Aging building code inspectors and government belt-tightening could cause crisis
Inspectors are edging toward retirement with no understudies in place.
Codes and Standards | Feb 20, 2017
AISI publishes three new cold-formed steel framing research reports
Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.