flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE/IES energy standard could become more applicable for global use

ASHRAE/IES energy standard could become more applicable for global use

Proposed addendum updates climate data and adds a climate zone


December 18, 2014

A proposed addendum to ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings would make the standard more applicable for use around the world.

The addendum was developed in response to an update of ASHRAE Standard 169-2013, Climatic Data for Building Design Standards, which now contains updated climate data and adds Climate Zone 0 with humid (0A) and dry (0B) zones. This has global implications for the standard, as Climate Zone 0 does not exist in the United States and is primarily used in the equatorial regions of South America, Africa, Middle East, southern Asia, and the south Pacific.

“It gives the standard more of an international view with maps and data never before available to users,” Dru Crawley, chair of the Standard 169 committee, said. “Previously there was the single U.S. map. Now there are high-level (1 deg latitude/longitude) maps of the world, covering each continent and major countries.”

This and other addenda are open for public review from Dec. 5, 2014, until Jan. 4, 2015.

(https://www.ashrae.org/news/2014/ashrae-ies-proposes-expansion-of-climate-zones-for-energy-standard)

Related Stories

Codes and Standards | Feb 10, 2021

More than two-thirds of construction companies say COVID-19 has not impacted their ESOP

Half of survey respondents say 2020 project profitability decreased due to pandemic.

Codes and Standards | Feb 9, 2021

New Jersey approves new electric vehicle-ready home requirement

Homebuyers must be given option for charging station on new construction.

Codes and Standards | Feb 9, 2021

New California law removes barriers to residential development

Measure removes restrictions for ADUs in urban areas and master planned communities.

Codes and Standards | Feb 8, 2021

Alliance yields more accurate data for rating and certifying systems of construction materials

Crosswalk API offers trusted format to specify and procure healthier products.

Codes and Standards | Feb 4, 2021

2021 IBC requires automatic doors for entrances to public buildings

One door must be either a full power-operated door or a low-energy power-operated door.

Codes and Standards | Feb 3, 2021

Two new International Code Council online code tools released

Offer detailed information about global building code usage and U.S. adoptions.

Codes and Standards | Feb 2, 2021

Biden tells OSHA to bolster COVID-19 safety rules

Order could lead to a national playbook for fighting COVID-19 on jobsites.

Codes and Standards | Feb 1, 2021

Fenestration Alliance updates standard for mulled combination assemblies

Last updated in 2010, document describes procedures and requirements for air leakage, water resistance, and structural performance.

Codes and Standards | Jan 28, 2021

Natl. Fire Protection Assn. releases new energy storage system fact sheet

Comes as Biden Administration prepares ambitious clean energy agenda.

Codes and Standards | Jan 27, 2021

AECOM sues insurance carrier for payment of COVID-19 property damage claims

Claims ‘all-risk policies’ should have included millions of dollars of losses due to virus.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021