flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE, WELL panels to tackle revising standards to limit spread of viruses in buildings

Codes and Standards

ASHRAE, WELL panels to tackle revising standards to limit spread of viruses in buildings

Will examine ways to reduce infectious threats through building designs and operations.


By Peter Fabris, Contributing Editor | April 28, 2020

Courtesy Pixabay

Both ASHRAE and the International WELL Building Institute have formed panels to address how building standards could limit the spread of viruses such as COVID-19 in buildings.

ASHRAE recently formed a committee to update advice and standards that address viral infections in buildings. The task force will recommend shifts in operational practices and design standards to ensure that buildings limit the spread of pathogens, according to an ASHRAE news release.

The task force is designed to serve as a clearinghouse to handle questions as they come in, to review research and to develop guidance. In addition to guidance and position papers, the task force’s work may lead to changes in ASHRAE standards, including 62.1 (non-residential ventilation), 62.2 (residential ventilation), 55 (thermal comfort), and 170 (healthcare ventilation).

WELL’s task force will examine ways to address infectious threats through building designs, operations, and standards. Among the possibilities are changes to incentives for ventilation and air filters and incorporation of antimicrobial surfaces.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021