flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE releases new version of Thermal Comfort Standard

Codes and Standards

ASHRAE releases new version of Thermal Comfort Standard

Update includes calculations from direct solar radiation.


By Peter Fabris, Contributing Editor | November 2, 2017
Wall insulation
Wall insulation

ASHRAE recently published the updated 2017 Version of Thermal Comfort Standard Standard 55-2017.

The update of the 2013 edition includes a new section with calculations from direct solar radiation. ANSI/ASHRAE Standard 55-2017, Thermal Environmental Conditions for Human Occupancy, simplifies the language of the 2013 standard and clarifies the three comfort calculation approaches in Section 5.3.3, "Elevated Air Speed."

The 2017 edition includes the new requirement to calculate the change in occupants' thermal comfort from direct solar radiation. Other additions include simplification of Appendix A to a single procedure for calculating operative temperature; clearly stated requirements and calculation procedures appearing sequentially; an update to the scope to ensure the standard is not used to override health, safety; critical process requirements; and removal of permissive language.

The ANSI/ASHRAE Standard 55-2017 is available for $89 for ASHRAE members for $105 for non-members.

Related Stories

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

| May 10, 2012

Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond

Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.

| May 10, 2012

Resilience should be considered a sustainability factor

Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021