ASHRAE recently published the updated 2017 Version of Thermal Comfort Standard Standard 55-2017.
The update of the 2013 edition includes a new section with calculations from direct solar radiation. ANSI/ASHRAE Standard 55-2017, Thermal Environmental Conditions for Human Occupancy, simplifies the language of the 2013 standard and clarifies the three comfort calculation approaches in Section 5.3.3, "Elevated Air Speed."
The 2017 edition includes the new requirement to calculate the change in occupants' thermal comfort from direct solar radiation. Other additions include simplification of Appendix A to a single procedure for calculating operative temperature; clearly stated requirements and calculation procedures appearing sequentially; an update to the scope to ensure the standard is not used to override health, safety; critical process requirements; and removal of permissive language.
The ANSI/ASHRAE Standard 55-2017 is available for $89 for ASHRAE members for $105 for non-members.
Related Stories
| Nov 26, 2012
How to boost resilient systems that are sustainable
Cities of the future can be both more resilient and more sustainable by promoting strategies that include solar power and green roofs, programs that minimize demand for energy, rain gardens, and permeable pavement.
| Nov 26, 2012
Developer of nation’s first LEED platinum skyscraper focuses on carbon reduction
The Durst Organization, the developer of the first LEED platinum certified skyscraper in the country, says it will not seek LEED certification for its residential pyramid planned for New York’s West 57th Street.
| Nov 26, 2012
Questions linger over ability of Miami's newer high-rises to withstand hurricanes
Some towers in Miami, rebuilt after a hurricane in 2005, were allowed to be constructed under older building codes instead of newer ones created after Hurricane Wilma.
| Nov 26, 2012
Changes in development and building standards needed for health of Potomac River
The Potomac River’s health stands to suffer if the region does not change its development and building standards, according to the Potomac Conservancy.
| Nov 16, 2012
South Dakota prefers LEED over building code on state projects
“(LEED is) much better than a mandatory building code because you get a little wiggle room in these projects,” said Mike Mueller, a spokesman for the South Dakota Bureau of Administration.
| Nov 16, 2012
AAMA publishes quality assurance guidelines for Polyamide Thermal Barriers
The American Architectural Manufacturers Association (AAMA) has published QAG-2-12, Voluntary Quality Assurance Processing Guide for Polyamide Thermal Barriers.
| Nov 16, 2012
New ANSI/BIFMA standards developed for educational seating
The American National Standards Institute (ANSI) has approved the newly developed safety and performance standard for educational seating: ANSI/BIFMA X6.1-2012—the first of its kind.