flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE proposes verification for energy standard

ASHRAE proposes verification for energy standard

Expected to reduce errors from envelope air leakage


September 10, 2014

The ASHRAE/IES energy standard would have multiple compliance options to ensure verification of delivered building envelope performance under a new proposal.

“Uncontrolled air leakage has long been an unquantified variable in load calculations for buildings large and small,” ASHRAE said in a news release. “It has also been identified as the ‘weak link’ in many otherwise well insulated building enclosures.” Proposed envelope testing, inspection and verification procedures are intended to help deliver better performing building envelopes, and help to reduce errors associated with envelope air leakage in equipment sizing calculations.

This proposal, Addendum l, is one of 14 proposed addenda to ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings, now open for public comment. To comment, visit www.ashrae.org/publicreviews.

The proposal provides for multiple compliance methods including whole building air leakage testing, continuous air barrier inspection, and performance verification procedures. The proposed changes would likely have an impact on first costs, but the long-term savings are expected to more than justify these costs. The costs of the verification procedures will go down over time as builders become more familiar with envelope performance testing, inspection and other verification techniques and their construction practices improve due to the important feedback they will provide, ASHRAE says.

(https://www.ashrae.org/news/2014/ashrae-ies-propose-adding-verification-requirements-to-energy-standard)

Related Stories

Codes and Standards | May 16, 2016

EPA proposes new stormwater discharge regulations for construction sites

Would apply to sites of one or more acres.  

Roofing | May 16, 2016

New guide focused on increasing energy and structural performance with raised-heel trusses

Higher trusses simplify attic ventilation, leave more space for insulation.  

Codes and Standards | May 11, 2016

Current California seismic codes provide safety, resiliency, but needed upgrades present challenge

Los Angeles requires seismic retrofits, but other cities do not.  

Codes and Standards | May 10, 2016

Apple spars with Cupertino, Calif., mayor over strained city infrastructure

Apple’s new ‘spaceship’ campus project prompts questions about whether the company should pay more to offset traffic woes.

Codes and Standards | May 9, 2016

Safety Stand-Down yields proposals to boost construction safety

One example: Gilbane encourages safety harnesses for all working above 6 feet.  

Codes and Standards | May 9, 2016

EcoDistricts unveils sustainable neighborhood framework

Focus is on equity, resilience, and climate protection.  

School Construction | May 3, 2016

Florida clamps down on school construction spending

Critics fear rules will hamper ability to build schools with desired features.  

Resiliency | May 2, 2016

Connecticut to develop new code standards for resiliency

Expected more frequent severe weather events due to climate change prompts review.  

Contractors | Apr 29, 2016

OSHA issues advisory to protect workers from Zika virus

Construction industry workers considered at high risk.  

Codes and Standards | Apr 28, 2016

New research finds 30 measures to significantly cut energy use

ASHRAE’s prescription cuts across all building types and climates.  

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021