flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Arup's Solarleaf façade system wins Zumtobel innovation award

Arup's Solarleaf façade system wins Zumtobel innovation award

The system uses the bio-chemical process of photosynthesis to absorb CO2 emissions, while cultivating microalgae to generate biomass and heat as renewable energy resources.


By Zumtobel Group Award | September 25, 2014
The Zumtobel Group Award honors contemporary realised or conceptual works of exceptional innovative content, design, technology and construction. Submissions must make a significant contribution to greater humanity and sustainability in the built environment. 
 
The winning project this year came from the Applied Innovations category--Arup Deutschland won with the "Solarleaf" facade system in Hamburg, Germany. The façade system was developed by Arup Deutschland in collaboration with SSC Strategic Science Consult GmbH and Colt International GmbH, with subsidies from the federal research initiative ZukunftBau. The system was first installed in a four-storey residential building that was designed by SPLITTERWERK architects for the 2013 International Building Exhibition (IBA) in Hamburg.
 
It showcases the first Solar-Leaf façade: a building integrated system absorbing CO2 emissions, while cultivating microalgae to generate biomass and heat as renewable energy resources. The environment for photosynthesis is provided by glass photobioreactors installed on the southwest and southeast elevations.
 
The SolarLeaf façade utilises the bio-chemical process of photosynthesis for energy efficient buildings and building clusters. There are three main benefits of the system: a) Generation of high-quality biomass for energetic use or as a resource for food and pharmaceutical industry (urban farming), b) generation of solar thermal heat and c) the use as a dynamic shading device.
 
Cultivating microalgae in flat panel photobioreactors requires no additional land-use and is largely independent from weather conditions, allowing installations in urban environments. A floatation device harvests the BIQ’s algal biomass automatically. The carbon required to feed the algae is taken from a combustion process in proximity of the façade installation to implement a short carbon cycle, preventing carbon emissions to contribute to climate change. Microalgae contain high-quality proteins, vitamins and amino acids that make it a valuable resource for the food and pharmaceutical industry.
 
The BIQ project is a milestone in opening up this value chain and creating a subsequent infrastructure. The developed bioreactors also capture solar thermal heat with an efficiency of approx. 50%. At the BIQ the heat is extracted by the use of heat exchangers and the temperature levels of the excess heat can be increased by using a heat pump for the supply of hot water or heating the building or stored geothermally. The system comprises bioreactor panels, associated mechanical services and the control unit to link the mass flows and optimize the efficiency of the building. The BIQ plays an important role in establishing surplus energy and zero carbon building clusters for the future.
 
© Colt, SSC, Arup
 
 
© Colt, SSC, Arup
 
 
© Colt, SSC, Arup
 
 
© Colt, SSC, Arup
 
 
© Colt, SSC, Arup

Related Stories

| Jul 10, 2013

TED talk: Architect Michael Green on why we should build tomorrow's skyscrapers out of wood

In a newly posted TED talk, wood skyscraper expert Michael Green makes the case for building the next-generation of mid- and high-rise buildings out of wood.

High-rise Construction | Jul 9, 2013

5 innovations in high-rise building design

KONE's carbon-fiber hoisting technology and the Broad Group's prefab construction process are among the breakthroughs named 2013 Innovation Award winners by the Council on Tall Buildings and Urban Habitat.

| Jun 28, 2013

Calculating the ROI of building enclosure commissioning

A researcher at Lawrence Berkeley National Laboratory calls building enclosure commissioning “the single-most cost-effective strategy for reducing energy, costs, and greenhouse gas emissions in buildings today.”

| Jun 27, 2013

Thermal, solar control designs can impact cooling loads by 200%, heating loads by 30%

Underestimating thermal bridging can greatly undermine a building’s performance contributing to heating load variances of up to 30% and cooling load variances of up to 200%, says the MMM Group.

| Jun 19, 2013

Florida is latest battleground over LEED standards centered on certified wood

A nationwide battle over forest certification standards continues to be played out nationally and in Florida with legislation passed this month. 

| Jun 14, 2013

Purdue, industry partners test light steel framing for seismic safety

A partnership of leading earthquake engineering researchers from top U.S. and Canadian universities and design professionals from the steel industry have begun the final phase of a three-year project to increase the seismic safety of buildings that use lightweight cold-formed steel for their primary beams and columns. 

| Jun 13, 2013

Health Product Declaration Collaborative names Knott as Executive Director

John L. Knott Jr. has been named as the Health Product Declaration Collaborative’s (www.hpdcollaborative.org) first Executive Director following a national search. The Health Product Declaration Collaborative (HPDC) is a customer-led standards-setting organization committed to the continuous improvement of the building industry’s environmental and health performance, through transparency and innovation in the building product supply chain.

| Jun 4, 2013

SOM research project examines viability of timber-framed skyscraper

In a report released today, Skidmore, Owings & Merrill discussed the results of the Timber Tower Research Project: an examination of whether a viable 400-ft, 42-story building could be created with timber framing. The structural type could reduce the carbon footprint of tall buildings by up to 75%.

| May 21, 2013

7 tile trends for 2013: Touch-sensitive glazes, metallic tones among top styles

Tile of Spain consultant and ceramic tile expert Ryan Fasan presented his "What's Trending in Tile" roundup at the Coverings 2013 show in Atlanta earlier this month. Here's an overview of Fasan's emerging tile trends for 2013.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021