flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Are Metal Panels An Ideal Low-Slope Roofing Material?

Sponsored Content Metals

Are Metal Panels An Ideal Low-Slope Roofing Material?


By MBCI | September 6, 2019
Are Metal Panels An Ideal Low-Slope Roofing Material? MBCI
Are Metal Panels An Ideal Low-Slope Roofing Material? MBCI

Many large, commercial, low-rise buildings such as warehouses, big box retail stores, agriculture structures, aviation facilities, etc. often don’t benefit from steeply-sloped roofs the way residences and small commercial buildings might. This is because a steep roof slope would add unwanted height and uneccesary construction cost.

Instead, these buildings are more appropriately built with so-called “flat roofs.” This is actually is a misnomer since the roofs are, in fact, “low-slope roofs” which the the National Roofing Contractors Association (NRCA) defines as any roof with “a slope at or less than 3:12.” Anything steeper is considered a “high-slope roof.” With this in mind, let’s look at some key points to consider when designing and constructing a low-slope roof. 

 

Low-Slope Roofing Materials

When it comes to selecting low-slope roofing products, there are generally three fundamental choices:

  1. Asphalt/ Bituminuous Products: The traditional commercial roofing norm for many years, the use of asphalt/bituminous products has dwindled as newer, more appealing options have emerged.
  2. Flexible Membrane Roofing: This roofing material can be made from a variety of types of plastic/polymer based materials (commonly known as EPDM, TPO, PVC, or others). Rolls of the selected membrane are laid out on the roof structure and secured in place either with properly spaced mechanical fasteners (screws with large washers) or with a continuous layer of adhesive.
  3. Metal Roofing: Sometimes overlooked, metal roofing is suitable for different roof slopes. Many metal roofs that use a standing-seam system are rated for use on roofs with a pitch as low as ½:12.

When considering which type of roofing material to use for a building project, there are a number of significant differences that illustrate why metal roofing is often preferred. 

 

Engineered For Superior Performance

Standing-seam metal roofing is designed and engineered specifically for use on low-slope roofs as it meets a number of performance requirements:

  • Water resistance: Water and other forms of precipitation don’t penetrate through metal and or through properly formed standing seams where the metal panels are joined. That is the reason they can tolerate such low slopes, allowing the water to drain away slowly and predictably without leakage.
  • Rigidity: The rigid nature of metal means that the opportunity for ponding (i.e. standing water on a roof) is eliminated. This is not always the case with asphalt/bituminous or membrane roofing systems.
  • Drainage: Water on a metal roof typically flows to the roof’s edge where it meets with gutters and downspouts that carry the water away from the building. Other roofing systems rely on interior drainage piped inside the building. This takes up space and has the potential to leak water inside the building and cause damage.
  • Wind Resistance: Standardized uplift testing of metal roofing shows that it can perform as well or even better than membrane systems that are either mechanically-fastened or fully-adhered.
  • Durability: Because of it’s engineered design and use of high quality coatings, the most cited advantage of metal roofing is its long-term strength and durability. That translates to a longer roofing life—50 years or more compared to the other two roofing types that are only rated for 20 or 30 years.
  • Puncture Resistance: Low-slope roofing tends to get walked on and may also take direct abuse from hail and other hazards. Metal roofing is more resistant to punctures than asphalt/bituminous or membrane roofing and better able to tolerate foot traffic and hail without getting punctured.
  • Construction/ Installation Ease: Metal roofing panels are sized and pre-fabricated to match the building where they are being installed. That typically means it takes less time in the field to place and install metal roofing compared to other types of roofing. Further, installation of metal panels is not restricted by temperature or other weather conditions since they can easily tolerate a wide range of either and still perform as intended. On low-slope roofs, their surface is also easy to walk on without risking falls or other safety hazards.

 

Cost-Effectiveness

Using metal roofing on low-slope roof systems has been shown to be quite cost effective in a number of ways:

  • Fewer labor hours as a result of the ease of installation saves money during construction.
  • Competitive material costs, particularly if the metal roofing is part of a total metal building package from a single manufacturer.
  • Minimal maintenance requirements and aversion to rusting, mold growth and decay that save the building owner money over time.

This all adds up to a very favorable life-cycle cost.

Considering the performance, cost and life-cycle benefits of metal roofing panels, this material should always be considered as a viable option for low-slope roofing systems. Metal roofing manufacturers like MBCI can not only help you select the right metal roofing products, but can also provide the information and resources needed to ensure they’re installed properly.

View examples of low-slope metal roofing projects and contact your local MBCI representative to start your project today.

Tags

Related Stories

Sponsored | Metals | Nov 6, 2017

A dream project

The dream came to life by joining together four Star metal buildings and adding a whole lot of TLC.

Sponsored | Metals | Oct 18, 2017

Standing up to Hurricane Irma

Star metal building systems have once again demonstrated their durability in extreme weather events.

Sponsored | Metals | Oct 9, 2017

Dual-purpose paneling redefines the building envelope for transportation solutions leader

Metl-Span® insulated metal panels provide insulation and aesthetic advantages.

Sponsored | Metals | Oct 6, 2017

Build a better building: The importance of using the right composite material

MCM has been around since the early 70s and has proven to be one of the most versatile architectural cladding products available.

Sponsored | Cladding and Facade Systems | Oct 5, 2017

Richland Two Institute of Innovation

Five colors of metal wall panels highlight design of multigenerational learning center.

Sponsored | Metals | Sep 26, 2017

A new lease on life for The Gin at the Co-Op District

The city specified the modern era’s leading sustainability features, but also requested a façade that harkened back to its agricultural roots.

Sponsored | Metals | Sep 11, 2017

Metal wall panels create diverse portfolios

Although square and rectangular wall panels have been the norm, new shape and texture trends are emerging.

Metals | Aug 17, 2017

Exterior metal panels complement performing arts center’s maple interior

Two Petersen Aluminum profiles were used in the design of the project.

Sponsored | Coatings | Aug 16, 2017

Architectural details offer endless inspiration

Railings, screens, canopies, and shading devices punctuate projects and are important aspects of the built environment.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021