The American Concrete Institute has released a new publication for concrete industry professionals—Guide to the Code for Assessment, Repair, and Rehabilitation of Existing Concrete Buildings.
The guide is a companion to ACI 562-16 Code Requirements for Assessment, Repair, and Rehabilitation of Existing Concrete Structures and Commentary. The publication provides assistance and examples to professionals for the repair of concrete buildings and is available as a printed and digital book.
Although specifically developed for licensed design professionals, the guide also provides insight into the use and benefits of ACI 562 for contractors, material manufacturers, building owners, and building officials. The publication provides information pertaining to how to interpret the performance requirements in ACI 562, and how the requirements may be applied to a broad range of projects.
Included is information on:
• Applicability of ACI 562
• Selection of the building code for the repair design
• Preliminary evaluations to determine a compliance method for meeting the code requirements
• Strength reduction factors and load combinations both during and after the repair
• Requirements for evaluation, determination of material properties, and load testing
• Considerations for design of structural repairs
• Durability requirements
• Construction considerations
• Quality assurance
Related Stories
| Apr 26, 2012
Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales
Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.
| Apr 26, 2012
New York City Council moves to license elevator mechanics
New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.
| Apr 23, 2012
AAMA releases updated specification for anodized aluminum
AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.
| Apr 19, 2012
Michigan legislature tackling controversial rules on electricians
A fight is brewing in the Michigan legislature over how many fully qualified electricians must be present during electrical work when apprentices also are on hand.
| Apr 19, 2012
Washington city may base building code on rising sea level due to global warming
Aberdeen may become the first city in Washington to base a building code on rising oceans and global warming.
| Apr 19, 2012
CSI webinar on energy codes and building envelopes
This seminar will review recent changes in energy codes, examples of building enclosure wall assemblies for code compliance, potential moisture management and durability challenges, and design tools to assess and minimize potential problems.
| Apr 19, 2012
Innovative plan for storm water in Philadelphia gets EPA’s OK
Philadelphia's $2 billion plan to manage its storm water with green methods including porous pavement, green roofs, and more trees, was officially approved last week by the U.S. Environmental Protection Agency.
| Apr 19, 2012
LEED 2012 to include new credit category for transit-oriented development
The updated LEED 2012 system will introduce a new credit category, “Location and Transportation,” to encourage development oriented around public transit and more walkable communities.
| Apr 17, 2012
FMI report examines federal construction trends
Given the rapid transformations occurring in the federal construction sector, FMI examines the key forces accelerating these changes, as well as their effect on the industry.
