flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

American Concrete Institute and Precast/Prestressed Concrete Institute expand partnership

Codes and Standards

American Concrete Institute and Precast/Prestressed Concrete Institute expand partnership

Will collaborate on new code requirements.


By Peter Fabris, Contributing Editor | March 4, 2020

Courtesy Pixabay

The American Concrete Institute and the Precast/Prestressed Concrete Institute will expand their partnership to collaborate more closely on structural concrete code requirements.

The two organizations and their members have worked collaboratively for decades, and this strengthened partnership formalizes efforts and expands the American Concrete Institute’s Committee 319, Precast Structural Concrete Code, into a joint committee cosponsored by both entities. ACI-PCI Committee 319 will develop and maintain structural concrete code requirements both unique to the design of precast concrete and complementary to ACI 318, “Building Code Requirements for Structural Concrete.” 

“Establishing this joint committee meets the needs of both PCI and ACI members by incorporating specific precast concrete design knowledge and expertise from both organizations,” said Bob Risser, PE, president and CEO, Precast/Prestressed Concrete Institute, in a news release. “Creating this new document will allow the codification of information that is already used by engineers and architects in everyday practice as well as providing one comprehensive document for the design of structural precast concrete.”

Related Stories

| Apr 26, 2012

Lack of bolts on steel support caused collapse at Cincinnati casino

Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.

| Apr 26, 2012

OSHA criticized for taking too long to roll out safety rules

The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.

| Apr 26, 2012

Contractors fear that GSA scandal will lead to fewer federal construction contracts

In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.

| Apr 26, 2012

Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales

Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.

| Apr 26, 2012

New York City Council moves to license elevator mechanics

New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.

| Apr 23, 2012

AAMA releases updated specification for anodized aluminum

AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.

| Apr 19, 2012

Michigan legislature tackling controversial rules on electricians

A fight is brewing in the Michigan legislature over how many fully qualified electricians must be present during electrical work when apprentices also are on hand.

| Apr 19, 2012

Washington city may base building code on rising sea level due to global warming

Aberdeen may become the first city in Washington to base a building code on rising oceans and global warming.

| Apr 19, 2012

CSI webinar on energy codes and building envelopes

This seminar will review recent changes in energy codes, examples of building enclosure wall assemblies for code compliance, potential moisture management and durability challenges, and design tools to assess and minimize potential problems.

boombox1
boombox2
native1

More In Category


Reconstruction & Renovation

Movement to protect historic buildings raises sharp criticism

While the movement to preserve historic buildings has widespread support, it also has some sharp critics with well-funded opposition groups springing up in recent years. Some opponents are linked to the Stand Together Foundation, founded and bankrolled by the Koch family’s conservative philanthropic organization, according to a column in Governing magazine.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021