The U.S. can cut its greenhouse gas emissions by at least 80% percent by 2050 with an “ambitious, but realistic, increase in clean energy,” according to a National Resources Defense Council report.
America’s Clean Energy Frontier: The Pathway to a Safer Climate Future says that such a reduction could be achieved almost entirely with tools available today. Recommended steps are:
More ambitious investments in efficient and/or electric vehicles, appliance, buildings, and industrial plants to cut energy use by almost half.
Dramatic expansion of renewable energy so that wind and solar power represent at least 70% of the nation’s electricity mix by 2050. This near-zero-carbon electricity would displace direct use of fossil fuels.
Lower-carbon fuels such as clean biofuels produced from sustainable biomass would be used for remaining uses that are currently hard to replace with electricity (e.g., airplanes, trucks, and steel manufacturing).
A stronger, modernized electricity grid would have to be built to better support renewable energy resources and energy efficiency.
Related Stories
Codes and Standards | Feb 12, 2015
ASHRAE, USGBC, IES consider biomass requirements in green building standard
The proposal would add biomass to approved renewables.
Codes and Standards | Feb 12, 2015
New Appraisal Institute form aids in analysis of green commercial building features
The Institute’s Commercial Green and Energy Efficient Addendum offers a communication tool that lenders can use as part of the scope of work.
Codes and Standards | Feb 8, 2015
ASHRAE, IAQA approve consolidation
Under the consolidation, IAQA will become a part of the ASHRAE organization while maintaining its own brand and Board of Directors.
Codes and Standards | Feb 6, 2015
Obama executive order requires federal construction projects to consider flood damage caused by climate change
To meet the new standard, builders must build two feet above the currently projected elevation for 100-year floods for most projects.
HVAC | Feb 6, 2015
ASHRAE, REHVA publish guide to chilled beam systems
The guide provides tools and advice for designing, commissioning, and operating chilled-beam systems.
Codes and Standards | Feb 2, 2015
AGC working with EPA on website to help with environmental rule compliance
The goal is for the site to be improved to make it easier for construction contractors to learn how to comply with federal and state environmental guidelines.
| Feb 2, 2015
New York law requires informing firefighters of wood truss construction
New York enacted a law that could make firefighting a bit safer by mandating property owners inform government and first-responders when they build or rehabilitate a building using "truss-type" pre-engineered wood or timber.
| Jan 14, 2015
Ontario code changes boost accessibility for people with disabilities
The new amended Ontario building code includes several provisions that improve accessibility for those with disabilities.
| Jan 14, 2015
American Concrete Institute releases Spanish edition of structural concrete code
New York City last year adopted the National Institute of Standards and Technology (NIST) recommendation to require additional exit stairways in high-rise buildings.
| Jan 14, 2015
Terrorism Risk Insurance Act renewed
President Barack Obama signed the Terrorism Risk Insurance Act law on Jan. 12.