HPD Collaborative (HPDC) and Construction Information Network (CIN) have formed a product alliance to dispense more accurate and reliable classification of products with data from HPD reports.
HPDC and CSI are integrating the Crosswalk API into the HPD Builder v2.2, which includes baseline data that feeds into all certification and rating systems. This new alliance aims to provide architects, engineers, designers, contractors, and building owners with consistent, accurate data that feeds into the rating, grading, and certification systems of materials used in the built environment.
The Crosswalk platform is an API that connects construction industry standards and classifications, including CSI’s MasterFormat, Uniformat, and OmniClass, and ASTM’s E1557-09(2020)e1 with construction technology platforms and data flows. Prior to this alliance, manufacturers created a Health Product Declaration (HPD) by providing their products’ classification codes into the HPD Builder, a software tool for entering data, performing hazard screening, and formatting reports to be consistent with the HPD Open Standard.
With this new alliance, manufacturers now access the Crosswalk platform directly from HPD Builder. This ensures their product classification data is entered in a structured format, providing consistency, and avoiding inaccuracies, while dramatically reducing time spent on researching the material ingredients of building products, according to a news release.
Related Stories
Codes and Standards | Dec 8, 2021
Proposals to add more multifamily to Atlanta prompt drive for Buckhead to secede
City aims to increase housing as projections point to sharp population increase.
Codes and Standards | Dec 7, 2021
Design problems now the primary cause of construction claims and disputes
More likely to occur due to more tight timescales imposed upon third parties engaged in design.
Codes and Standards | Dec 5, 2021
New standard for Phase I environmental reports requires more research work on many sites
Update affects around 250,000 commercial real estate transactions a year.
Codes and Standards | Nov 30, 2021
Dept. of Energy publishes RFP for technical assistance on supporting better building codes
Addresses advanced standards to reduce energy consumption and GHG emissions.
Codes and Standards | Nov 29, 2021
Ithaca, N.Y., votes to electrify, decarbonize all its buildings
First initiative of its kind in U.S.
Codes and Standards | Nov 29, 2021
FAA seeking design of air traffic control towers of the future
Call for design submissions for safe, efficient structures.
Codes and Standards | Nov 28, 2021
Efficient electric water heaters in multifamily buildings significantly reduce carbon emissions
In buildings with 5+ units, water heating uses more energy than space heating, cooling, or lighting.
Codes and Standards | Nov 23, 2021
New York’s Labor Law Section 240 and how it affects general contractors
The ‘Scaffold Law’ was first enacted by the New York State Legislature in 1885 and is one of the single most-used laws in construction accident cases.
Codes and Standards | Nov 22, 2021
ABC’s Construction Technology Report finds focus on solving operational problems
More than half rely on project management software.
Codes and Standards | Nov 22, 2021
Contractors say 811 utility location system has significant flaws
More than half of firms in survey report damages, near misses because lines were unmarked or marked incorrectly.