Alliance of Pittsburgh building owners slashes carbon emissions by 45%

The Pittsburgh 2030 District, an alliance of building owners in the Pittsburgh area, says that it has reduced carbon emissions by 44.8% below baseline.

Begun in 2012 under the guidance of the Green Building Alliance (GBA), the Pittsburgh 2030 District encompasses more than 86 million sf of space within 556 buildings.

The project has created a savings of $205.8 million in energy and water costs, and 1.85 million metric tons of carbon dioxide emissions avoided since 2012, according to its 2022 Progress Report.

GBA provides participants with education, training, and guidance to further their progress, covering topics such as:

Conducting deep carbon retrofits on existing buildings to dramatically improve efficiency
Case studies of net zero carbon retrofits
Examples of whole building life cycle analysis
Embodied carbon
Facilitating building electrification to eliminate fossil fuel use, including replacing furnaces and boilers that run on natural gas with ground- or air-source heat pumps.
Thermal energy storage

Pittsburgh is the North American leader in amount of square footage committed to 2030 District goals. There are 22 international 2030 Districts in total.

When tapped to create a modern 280-unit residence in downtown Philadelphia, modular builder Volumetric Building Companies used the MagicPak All-in-One™ HVAC system to optimize square footage, expand rooftop amenities, improve the exterior aesthetics and simplify ongoing maintenance – all with 60 percent less onsite HVAC install time than a traditional split system.

Monaco Apartments in Midland, Texas, designed by HEDK Architects, Connect Structural, and Jordan & Skala Engineers, and built by BC Contracting. Photo: Brian Martin, Hommati

Giants 400 | Nov 18, 2021

2021 Multifamily Sector Giants: Top architecture, engineering, and construction firms in the U.S. multifamily building sector

Clark Group, Humphreys and Partners, and Kimley-Horn head BD+C's rankings of the nation's largest multifamily building sector architecture, engineering, and construction firms, as reported in the 2021 Giants 400 Report.

EXACOR mgo underlayment panels on multifamily jobsite

How TDK Construction Saves Time and Money with EXACOR™ MgO Panels: Getting in on the Ground Level

Smart decisions made at the start of multifamily design-builds can improve efficiency on the job site, keeping projects on-time and on-budget, so you can make your properties profitable sooner. TDK Construction did just that on a recent luxury apartment project in Tennessee.

Tuck under parking at Fairfax Flats, Nashville, designed by The Bradley Projects.

Multifamily Housing | Nov 14, 2021

How to build better parking for multifamily housing projects

In designing and building multifamily projects, parking determines everything from site suitability to the building’s footprint to revenue optimization.