flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

AISI publishes three new cold-formed steel framing research reports

Codes and Standards

AISI publishes three new cold-formed steel framing research reports

Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.


By Peter Fabris, Contributing Editor | February 20, 2017

Pixabay Public Domain

The American Iron and Steel Institute (AISI) has published three new cold-formed steel framing research reports: 1) “RP15-3: Advancing Seismic Simulation of Cold-Formed Steel Framed Buildings,” 2) “RP17-1: Experimental Study on System Reliability of Cold-Formed Steel Roof Trusses,” and 3) “RP17-2: Monotonic and Cyclic Response of Single Shear Cold-Formed Steel-to-Steel and Sheathing-to-Steel Connections.”

“RP15-3: Advancing Seismic Simulation of Cold-Formed Steel Framed Buildings.” This report advances performance-based seismic design of cold-formed steel framed buildings by introducing computationally efficient and accurate modeling tools that predict the behavior of the building, the individual cold-formed steel components, and connections in a seismic event.

“RP17-1: Experimental Study on System Reliability of Cold-Formed Steel Roof Trusses.” This study of cold-formed steel roof trusses was part of a project funded by the National Science Foundation, “Advancing System Reliability With Application to Light-Framed Structures.” Test data are provided for examining cold-formed steel structural reliability in roof trusses as a system versus individual components.

“RP17-2: Monotonic and Cyclic Response of Single Shear Cold-Formed Steel-to-Steel and Sheathing-to-Steel Connections.” Researchers developed load-deformation response models to simulate the performance of screw fasteners in a seismic event. Since screw fasteners are the primary connectors in light steel framing, this research provides designers with more accurate performance-based data for conducting whole building seismic analysis.

Related Stories

Codes and Standards | Apr 2, 2021

Intl. Code Council’s new development system could be a brake on building decarbonization

Local governments lose influence on creating new energy efficiency rules.

Codes and Standards | Apr 1, 2021

Cuomo proposes strengthened NY building codes to boost efficiency

Would apply to appliance, equipment efficiency and reduce water use.

Codes and Standards | Mar 25, 2021

N.C.’s Outer Banks’ communities struggle for ways to keep the sea from overrunning them

Tax hikes for beach replenishment offer temporary solution.

Codes and Standards | Mar 23, 2021

The 15-minute city may not work in much of North America

Segregated neighborhoods and car-centric cities may not adapt to the European model.

Codes and Standards | Mar 22, 2021

Think tank offers plan for new approach to reduce neighborhood poverty

Strategy uses more targeted approach to invest in low-income areas.

Codes and Standards | Mar 19, 2021

California city bans construction of new gas stations

Existing stations will not be allowed to add more pumps.

Codes and Standards | Mar 18, 2021

Congressmen ask Biden to tackle rising lumber costs

Rising materials costs and supply shortages threaten economic recovery, housing starts.

Codes and Standards | Mar 16, 2021

Massachusetts bill would mandate rooftop solar on new homes, commercial buildings

Proposed Bay State mandate modeled on California’s.

Codes and Standards | Mar 15, 2021

Nevada may create areas for tech companies to form own governments

Legislation calls for ‘Innovation Zones’ that could become smart cities.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021