The AISC standard Prequalified Moment Connections for Special and Intermediate Steel Moment Frames for Seismic Applications (ANSI/AISC 358-10) has been updated with a second supplement, ANSI/AISC 358s2-14. The supplement adds the proprietary SidePlate moment connection to the roster of prequalified connections. The prequalified moment connection standard is an essential companion to the AISC Seismic Provisions (ANSI/AISC 341-10).
The supplemented standard now covers seven moment connections: reduced beam section connections; bolted stiffened and unstiffened extended end-plates; bolted flange plate connections; welded unreinforced flange-welded web connections; Kaiser bolted bracket connections; ConXtech CONXL connections; and SidePlate connections. Each connection chapter includes a step-by-step design procedure.
For ease of use, ANSI/AISC 358-10 and its supplements ANSI/AISC 358s1-11 and ANSI/AISC 358s2-14 are available as an integrated, single free download at www.aisc.org/aisc358. For more about the standard, see www.aisc.org/specifications.
(http://archives.informz.net/clients/aisc/archives/archive_4006887.html)
Related Stories
| Jun 5, 2012
AGC’s Safety and Health Conference focuses on regulations, legislation
More than 150 industry professionals and other attendees will participate in the Associated General Contractors of America’s (AGC’s) safety and health conference July 11-13 in Washington, D.C.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| May 31, 2012
Proposed change in Michigan’s building code would hurt innovation, say critics
Legislation pending before the Michigan Senate would change the law that calls for building codes to be updated every three years to require an update only every six years.
| May 31, 2012
Natural gas industry opposes federal carbon-neutral construction rule
The natural gas industry and some allies are working to block a federal green building rule that was expected to be a national model for carbon-neutral construction.
| May 31, 2012
Lawsuits push the legal boundaries of green building definition
This article explores some legal issues stemming from lawsuits in which plaintiffs have charged developers with not delivering on a promised level of sustainability.
| May 31, 2012
ANSI approves Green Building Initiative’s design standard
The Green Building Initiative (GBI), a Portland, Ore. nonprofit organization, has had its new consensus-based standard for the design, construction, and operations of environmentally friendly buildings approved by the American National Standards Institute (ANSI).
| May 31, 2012
USGBC testing Minnesota buildings to see if they are living up to LEED standards
The Minnesota chapter of the U.S. Green Building Council (USGBC) has teamed up with EnergyPrint, a St. Paul, Minn. energy consulting firm, to study the energy and water use of more than 150 buildings in the state that have LEED certification.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.