The 2016 version of the American Institute of Steel Construction (AISC) standard, Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications (ANSI/AISC 358-16) is now available for free downloading on the AISC website at www.aisc.org/aisc358.
This updated version has been expanded to cover nine connections:
• Reduced beam section moment connections
• Bolted stiffened and unstiffened extended end-plate moment connections
• Bolted flange plate moment connections
• Welded unreinforced flange-welded web moment connections
• Kaiser bolted bracket moment connections
• ConXtech ConXL moment connections
• SidePlate moment connections
• Simpson Strong-Tie Strong Frame moment connections
• Double-tee moment connections
In addition to general requirements and limitations, each prequalified connection chapter includes a step-by-step design procedure. The new standard has been approved by the AISC Connection Prequalification Review Panel (CPRP) and is ANSI-accredited.
“With the release of AISC 358-16, there are now nine prequalified beam-to-column moment connections for Special and Intermediate Moment Frames,” said Michael D. Engelhardt, chairman of the committee. “Work is already underway to prequalify additional connections and to extend the range of use for some of the existing prequalified connections, with the goal of providing designers with an ever growing range of options.”
Related Stories
| Sep 16, 2022
Fairfax County, Va., considers impactful code change to reduce flood risk
Fairfax County, Va., in the Washington, D.C., metro region is considering a major code change to reduce the risk from floods.
| Sep 13, 2022
California building codes now allow high-rise mass-timber buildings
California recently enacted new building codes that allow for high-rise mass-timber buildings to be constructed in the state.
| Sep 8, 2022
U.S. construction costs expected to rise 14% year over year by close of 2022
Coldwell Banker Richard Ellis (CBRE) is forecasting a 14.1% year-on-year increase in U.S. construction costs by the close of 2022.
| Aug 29, 2022
Montana becomes first U.S. state to approve 3D printing in construction
Montana is the first U.S. state to give broad regulatory approval for 3D printing in building construction.
| Aug 25, 2022
New York City’s congestion pricing aims to reduce traffic, cut carbon
Officials recently released an environmental assessment that analyzes seven different possible pricing schemes for New York City’s congestion pricing program.
| Aug 23, 2022
New Mass. climate and energy law allows local bans on fossil fuel-powered appliances
A sweeping Massachusetts climate and energy bill recently signed into law by Republican governor Charlie Baker allows local bans on fossil fuel-powered appliances.
| Aug 22, 2022
Gainesville, Fla., lawmakers moved to end single-family zoning
The Gainesville City Commission recently voted to advance zoning changes that would allow duplexes, triplexes, and quadplexes to be built on land currently zoned for single-family homes.
| Aug 16, 2022
DOE funds 18 projects developing tech to enable buildings to store carbon
The Department of Energy announced $39 million in awards for 18 projects that are developing technologies to transform buildings into net carbon storage structures.
| Aug 11, 2022
Report examines supposed conflict between good design and effective cost management
A report by the American Institute of Architects and the Associated General Contractors of America takes a look at the supposed conflict between good design and effective cost management, and why it causes friction between architects and contractors.
| Aug 10, 2022
U.S. needs more than four million new apartments by 2035
Roughly 4.3 million new apartments will be necessary by 2035 to meet rising demand, according to research from the National Multifamily Housing Council (NMHC) and National Apartment Association.
