Designers, engineers, and commercial building owners have several ways to safeguard indoor air during the COVID-19 pandemic.
Office buildings can slow the spread by spacing desks at least six feet apart and by implementing a few ventilation measures including increasing outdoor air flow. Installing Minimum Efficiency Rating Value (MERV) 13 and above filters—commonly used in hospitals—in air handlers can also have an impact. Indoor air cleaners with high-efficiency particulate air filters will remove even more particulates including pathogens.
Lesser-known strategies include CASPR (Continuous Air and Surface Pathogen Reduction) devices that spray trace amounts of hydrogen peroxide into indoor air that kills pathogens in the air and on surfaces. Short-wave ultraviolet light is also effective in neutralizing pathogens.
This technology can be employed by installing Ultraviolet Germicidal Irradiation [UVGI] in high-room [9-feet or higher] lighting applications in mechanical units and heating ducts.
Related Stories
Codes and Standards | Mar 14, 2017
Timber Innovation Act to promote tall wood buildings introduced in Congress
The measure has bipartisan support.
Codes and Standards | Mar 13, 2017
U.S. House and Senate have voted to repeal Dept. of Labor’s 'blacklisting' rule
The rule mandates labor compliance review for federal construction contractors.
Codes and Standards | Mar 9, 2017
WiredScore forms Connectivity Advisory Committee
The committee's creation is an important step forward for the group that evaluates internet connectivity in buildings.
Codes and Standards | Mar 8, 2017
New guide examines multifamily high-performance ventilation
The focus is on cost and performance of various systems.
Codes and Standards | Mar 7, 2017
Canada’s national building codes will encompass effects of climate change
Forecasted data, not historical data, will be used as the basis for the codes.
Codes and Standards | Mar 6, 2017
ConsensusDocs updates standard short contract editions
The updates address industry changes impacting insurance, legal, technology, and terminology.
Codes and Standards | Mar 3, 2017
ASCE updates standard for structures using tensile membrane
The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.
Codes and Standards | Mar 1, 2017
EPA's 2017 Construction General Permit now in effect
The regulation governs compliance with effluent limits.
Codes and Standards | Feb 28, 2017
Concern grows for high tide flood vulnerability in Mid-Atlantic states
Washington, D.C., and Annapolis, Md., could flood every three days by 2045.
Codes and Standards | Feb 27, 2017
Green building saves operating costs and boosts asset value
A new report shows 14% cost savings and a 7% increase in value when green standards are met.
