The American Institute of Architects has released AIA Document C203 – 2017 Standard Form of Consultant’s Services: Commissioning.
C203-2017 replaces B211-2007, Standard Form of Architect’s Services: Commissioning. The form is intended to be used as a supplement to AIA Document C103–2015, Standard Form of Agreement Between Owner and Consultant without a Predefined Scope of Consultant’s Services as a guide for drawing up a contract for commissioning services.
C203 is no longer written as an architect’s scope of services. Instead, it can also be used to hire professionals with other backgrounds to perform commissioning services.
Notable changes in the new form include:
- Provisions describing the consultant’s role to assist in preparing the owner’s project
- A more detailed description of the consultant’s commissioning plan
- Updated provisions related to commissioning-related design reviews
- Updated provisions related to the consultant’s role in commissioning during the construction phase of the project
- An expanded initial information section
- Updated provisions for supplemental services
The new document is intended to allow for modifications to fit individual projects so that modifications are easily distinguished from the original, printed language. For more information, visit: https://www.aiacontracts.org/.
Related Stories
| May 17, 2012
New standard for Structural Insulated Panels under development
ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.
| May 17, 2012
Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’
A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.
| May 17, 2012
California Governor orders new green standards on state buildings
California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.
| May 17, 2012
New Zealand stadium roof collapse blamed on snow, construction defects
Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.
| May 17, 2012
OSHA launches fall prevention campaign
The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.
| May 15, 2012
Suffolk selected for Rosenwald Elementary modernization project
The 314-student station elementary school will undergo extensive modernization.
| May 10, 2012
Chapter 6 Energy Codes + Reconstructed Buildings: 2012 and Beyond
Our experts analyze the next generation of energy and green building codes and how they impact reconstruction.
| May 10, 2012
Resilience should be considered a sustainability factor
Since a sustainable building is one you don't have to rebuild, some building sustainability experts believe adding points for "resilience" to storms and earthquakes to the LEED sustainability rating tool makes sense.
