flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

AIA contract document updates include new BIM, digital data provisions

Codes and Standards

AIA contract document updates include new BIM, digital data provisions

Documents are structurally different from 2007, 2008 versions.


By Peter Fabris, Contributing Editor | October 20, 2017
Blueprints
Blueprints

The AIA Documents Committee has revamped standard contract documents regarding Building Information Modeling (BIM) and other digital data.

The first standard forms for BIM were released a decade ago, and much has changed regarding BIM practices since then. The 2017 release updates digital practice documents including AIA Document E203–2013, Building Information Modeling and Digital Data Exhibit; AIA Document G201–2013, Project Digital Data Protocol Form; and AIA Document G202–2013, Project Building Information Modeling Protocol Form.

The updated documents are structurally different from their predecessors. They require all members of the building team to agree upon protocols for the transmission and use of instruments of service or other documentation in digital form. They also address the risks and responsibilities associated with sharing project information in digital format.

Members of the building team must spell out requirements for the various elements of the model at various stages of the project. These details should be well documented so that allowed uses of the model and how it is to be used are well understood by all parties.

Revised documents clarify that the contractor may maintain contract documents, change orders, construction change directives, and other modifications at the site in electronic format. The documents also now address the issue of notice in electronic format.

For more information on AIA contract documents, visit: https://www.aiacontracts.org/

Related Stories

| Dec 26, 2013

USGBC recognizes Ohio for achieving 100th LEED-certified public school

The U.S. Green Building Council (USGBC) has recognized the state of Ohio and the Ohio School Facilities Commission (OSFC) on the LEED certification of the 100th public school building in the state. 

| Dec 26, 2013

WDMA launches project to create ISO-compliant architectural doors

WDMA's National Architectural Door Council has initiated a project to create ISO-compliant Product Category Rules for architectural wood flush and stile and rail doors

| Dec 19, 2013

Defense Department okays Green Globes standard for DoD facilities

The Green Globes certification program from the Green Building Initiative can be used for the renovation and construction of Department of Defense facilities following agency endorsement.

| Dec 19, 2013

New York City proposal may boost standards for crane maintenance

New York City may boost maintenance standards for cranes operating in the city, including the addition of load cycle counters to record data regarding every lift that a crane performs.

| Dec 19, 2013

Lawmakers say EPA’s Energy Star standards lack transparency

A bipartisan group of lawmakers is raising concerns that the Environmental Protection Agency has not been transparent in drafting energy-efficiency standards under the Energy Star program.

| Dec 18, 2013

ASHRAE publishes 2013 thermal comfort standard

Major revisions for design and measurement of comfortable spaces are included in a newly published ASHRAE 2013 thermal comfort standard.

| Dec 11, 2013

Texas to require architects to be fingerprinted to get licensed

Starting January 1, 2014, architects who apply for an occupational license in Texas will have to share their fingerprints with the state.

| Dec 11, 2013

Province of Ontario is reviewing bill to require timely payments to contractors

Legislation is under review in the Province of Ontario that would mandate timely payments to contractors.

| Dec 11, 2013

Federal design-build proposal could make it easier for small businesses to land government contracts

The Design-Build Efficiency and Jobs Act, a bill pending in the U.S. House of Representatives, would streamline the bid and proposal process by requiring government agencies to use a two-step process when seeking design-build contracts for projects worth more than $750,000.

| Dec 11, 2013

NIST recommends tougher standards for tornado resilience

Buildings in tornado-prone areas should be constructed to withstand strong winds just as hurricanes are factored into building codes in coastal areas, says a federal report examining the 2011 killer tornado in Joplin, Mo.

boombox1
boombox2
native1

More In Category

Sustainability

Grimshaw launches free online tool to help accelerate decarbonization of buildings

Minoro, an online platform to help accelerate the decarbonization of buildings, was recently launched by architecture firm Grimshaw, in collaboration with more than 20 supporting organizations including World Business Council for Sustainable Development (WBCSD), RIBA, Architecture 2030, the World Green Building Council (WorldGBC) and several national Green Building Councils from across the globe.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021