The International Code Council (ICC), the U.S. Green Building Council (USGBC), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), and ASHRAE are collaborating on the next editions of the International Green Construction Code (IgCC), ASHRAE Standard 189.1, and the LEED standard.
The groups say the effort should encourage the construction of more sustainable buildings.
"Our organizations working together will result in harmonization of technical, administrative and compliance expertise to produce a single green code, simplifying the choice among design and code options for the using community,” said IES director of technology Rita Harrold.
ASHRAE is revising Standard 189.1—the Standard for the Design of High-Performance Green Buildings Except Low-Rise Residential Buildings—and the goal is to incorporate it with IgCC into one regulatory tool. Another goal is to align that document with LEED. The effort will make compliance and building to green standards easier, the groups say.
Related Stories
Codes and Standards | May 15, 2018
Blast testing of loaded mass timber structures yields positive results
Four tests covered a spectrum of blast loads.
Codes and Standards | May 14, 2018
Maryland makes general contractors liable for failure of subs to pay employees
GCs could have to pay for up to three times the wages owed.
Codes and Standards | May 10, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.