flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Acoustical design education model

Acoustical design education model

Pass this exam and earn 1.0 AIA/CES Discovery learning units. You must go to www.BDCnetwork.com/EnhancedAcousticalDesign to take this exam.


By By BD+C Staff | August 23, 2011
This article first appeared in the August 2011 issue of BD+C.

 

1. To optimize a space for speech intelligibility, designers should specify products such as fiberglass ceiling tiles that have a noise reduction coefficient (NRC) of:

                  A.                  Less than 0.5

                  B.                  Greater than 0.5

                  C.                   Exactly 1.0.

                  D.                  Greater than 1.0

2. Which of the following statements is NOT true, according to research from John Hopkins University and the University of Kansas?

                  A.                  Sound pressure levels in hospitals decrease each year by 0.40 db(A).

                  B.                  Sound pressure levels in hospitals are increasing each year by 0.40 db(A).

                  C.                  Average speech intelligibility ratings for U.S. classrooms in 2000 were 75% or less.

                  D.                  Average sound levels at Johns Hopkins Hospital have exceeded the range at which normal conversation takes place.

3. Which of the following is a design element of a suspended ceiling strategy for sound absorption, sound isolation, or both?

                  A.                  Using vibration isolation hangers.

                  B.                  An acoustically absorptive ceiling layer with a large air gap behind it.

                  C.                  Acoustical ceiling tile on a grid.

                  D.                  All of the above.

4. Ceiling tile with a mid-level Ceiling Attenuation Class—or a heavy, rigid ceiling finished with a drywall suspended ceiling with an exposed acoustical plaster system— would be a viable solution for:

                  A.                  An energy-efficient acoustical ceiling design.

                  B.                  A space that both absorbs and isolates sound.

                  C.                  An acoustically high-performing workplace or office.

                  D.                  None of the above.

5. Which of the following is NOT a key variable when formulating wall design for ideal sound isolation?

                  A.                  Wall mass

                  B.                  Air space

                  C.                  Plenum temperature

                  D.                  Air tightness

6. True or false: If the window area exceeds 10% of the total wall area, then the window and frame will generally dictate the Sound Transmission Coefficient (or sound transmission loss performance) for the entire wall.

                  A.                   True

                  B.                  False

7. One drawback of concrete floors is the transmission of high-frequency impact noise such as high heels tapping on the floor. Which of the following is a workable solution to this problem?

                  A.                   Carpeting

                  B.                  Cork tiles

                  C.                  Felt underlayments

                  D.                  Specifying another kind of flooring

8. MEP systems, especially HVAC systems, can contribute significantly to undesirable ambient noise levels. Which of the following is NOT a step that can be taken to mitigate these noise issues?

                  A.                  Specifying quiet equipment

                  B.                  Siting the equipment near occupied spaces

                  C.                  Correctly sizing the equipment

                  D.                  Limiting air velocity

9. True or false: It is not possible to specify daylighting products with lighter surfaces that absorb sound.

                  A.                   True

                  B.                  False

10. Which of the following standards or guidelines does NOT recognize acoustic elements as essential to sustainability or occupant health?

                  A.                  LEED for Healthcare

                  B.                  ANSI Classroom Acoustic Standard (ANSI S12.60)

                  C.                  LEED for Homes

                  D.                  FGI/ASHE Guidelines

Related Stories

| Oct 12, 2010

Gartner Auditorium, Cleveland Museum of Art

27th Annual Reconstruction Awards—Silver Award. Gartner Auditorium was originally designed by Marcel Breuer and completed, in 1971, as part of his Education Wing at the Cleveland Museum of Art. Despite that lofty provenance, the Gartner was never a perfect music venue.

| Aug 11, 2010

test

boombox1
boombox2
native1

More In Category


Mass Timber

5 solutions to acoustic issues in mass timber buildings

For all its advantages, mass timber also has a less-heralded quality: its acoustic challenges. Exposed wood ceilings and floors have led to issues with excessive noise. Mass timber experts offer practical solutions to the top five acoustic issues in mass timber buildings.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021