flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ABC: Construction material prices continue free fall in December

Market Data

ABC: Construction material prices continue free fall in December

In December, construction material prices fell for the sixth consecutive month. Prices have declined 7.2% since peaking in August 2014.


By ABC | January 15, 2016

Photo: Dennis S. Hurd/Creative Commons.

Construction material prices fell for the sixth consecutive month in December, losing 1.2% on a monthly basis and 4% on a yearly basis according to an analysis of the Bureau of Labor Statistics Producer Price Index released by Associated Builders and Contractors (ABC).

Construction input prices have fallen 7.2% since peaking in August 2014, and have fallen in 11 of the previous 16 months. Nonresidential construction input prices exhibited similar declines, falling 1.1% for the month and 4% for the year. 
 
"Construction input prices continued to sink to the end of 2015, due in large measure to global deflationary forces that have become increasingly apparent," said ABC Chief Economist Anirban Basu. "The World Bank predicts that the global economy will expand by less than 3% in 2016, very limited growth by historic standards. Last year, the global economy expanded by just 2.4%, with significant weakness recorded in much of the emerging world. Like last year, major emerging nations like Russia and Brazil are anticipated to be in recession. 
 
"In addition, the U.S. dollar remains strong," Basu said. "With only a couple of exceptions, the U.S. is the only major nation to increase interest rates. If interest rates rise as anticipated, the dollar will strengthen further in 2016, placing additional downward pressure on input prices. Even significant geopolitical events involving oil producing nations has not been enough to stem the decline in oil or other commodity prices."

Only four key input prices expanded in December on a monthly basis:

  • Natural gas prices expanded 5.2% month-over-month but are down 46.5% year-over-year.
  • Prices for prepared asphalt and tar roofing and siding products rose 1% on a monthly basis but are down 2% on a yearly basis. 
  • Concrete product prices ticked 0.3% higher from November and are up 3% from the same time one year ago. 
  • Fabricated structural metal product prices inched 0.1% higher for the month but are 0.9% lower than at the same time one year ago. 

Seven key input prices fell in December on a monthly basis:

  • Crude petroleum prices plunged 16% month-over-month and are 43.3% lower year-over-year.
  • Crude energy materials prices fell 5.7% for the month and are down 35.8% for the year. 
  • Softwood lumber prices shed 2.9% from November and are 6.8% lower than at the same time one year ago.
  • Steel mill product prices dipped 2.7% for the month and 19.8% for the year.
  • Prices for nonferrous wire and cable fell 2.7% on a monthly basis and are down 9.9% on a yearly basis. 
  • Iron and steel prices are down 2.2% for the month and 23.7% for the year. 
  • Prices for plumbing fixtures and fittings fell 0.5% month-over-month but expanded 1.3% year-over-year.

Related Stories

Market Data | Dec 29, 2020

Multifamily transactions drop sharply in 2020, according to special report from Yardi Matrix

Sales completions at end of Q3 were down over 41 percent from the same period a year ago.

Market Data | Dec 28, 2020

New coronavirus recovery measure will provide some needed relief for contractors coping with project cancellations, falling demand

Measure’s modest amount of funding for infrastructure projects and clarification that PPP loans may not be taxed will help offset some of the challenges facing the construction industry.

Market Data | Dec 28, 2020

Construction employment trails pre-pandemic levels in 35 states despite gains in industry jobs from October to November in 31 states

New York and Vermont record worst February-November losses, Virginia has largest pickup.

Market Data | Dec 16, 2020

Architecture billings lose ground in November

The pace of decline during November accelerated from October, posting an Architecture Billings Index (ABI) score of 46.3 from 47.5.

AEC Tech | Dec 8, 2020

COVID-19 affects the industry’s adoption of ConTech in different ways

A new JLL report assesses which tech options got a pandemic “boost.”

Market Data | Dec 7, 2020

Construction sector adds 27,000 jobs in November

Project cancellations, looming PPP tax bill will undercut future job gains.

Market Data | Dec 3, 2020

Only 30% of metro areas add construction jobs in latest 12 months

Widespread project postponements and cancellations force layoffs.

Market Data | Dec 2, 2020

New Passive House standards offers prescriptive path that reduces costs

Eliminates requirement for a Passive House consultant and attendant modeling.

Market Data | Dec 2, 2020

Nonresidential construction spending remains flat in October

Residential construction expands as many commercial projects languish.

Market Data | Nov 30, 2020

New FEMA study projects implementing I-Codes could save $600 billion by 2060

International Code Council and FLASH celebrate the most comprehensive study conducted around hazard-resilient building codes to-date.  

boombox1
boombox2
native1

More In Category

Healthcare Facilities

Watch on-demand: Key Trends in the Healthcare Facilities Market for 2024-2025

Join the Building Design+Construction editorial team for this on-demand webinar on key trends, innovations, and opportunities in the $65 billion U.S. healthcare buildings market. A panel of healthcare design and construction experts present their latest projects, trends, innovations, opportunities, and data/research on key healthcare facilities sub-sectors. A 2024-2025 U.S. healthcare facilities market outlook is also presented.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021