The American Architectural Manufacturers Association (AAMA) has released an updated document specifying test methods, specifications, and field checks used to evaluate the structural adequacy of wall systems and their ability to resist water penetration and air leakage. Other optional tests are also included.
AAMA 501-15 is intended to be referenced in laboratory and field testing methods for exterior wall systems composed of curtain walls, storefronts, and sloped glazing. It was previously updated in 2005.
According to José Colon (Architectural Testing), Chair of the AAMA 501 Update Task Group, the standard was recently updated to make sure all labs and product manufacturers are on the same page with procedures and with pass/fail criteria for certain parts of the standard. These document updates also take into consideration new technologies for equipment being used for testing.
“Historically, AAMA 501 has been the base standard for project specific test requirements,” says Colon. “More and more specifications are being written that are even longer than what is called out in AAMA 501.” This is especially the case in places with more detailed codes, like Miami-Dade County or the state of Florida in general, said Colon.
Related Stories
| Jan 18, 2012
California approves open cell spray foam for energy efficiency standards
The California Energy Commission (CEC) now recognizes open-cell spray foam as an accepted insulation in its 2008 Building Energy Efficiency Standards.
| Jan 5, 2012
Building to LEED standards now an 'easy call' from cost standpoint
Once seen as a cost burden, building to LEED standards is now an "easy call," according to Dan Probst, chairman of energy and sustainability for real estate management and development firm Jones Lang LaSalle.
| Jan 5, 2012
Minnesota's GreenStep Cities program aids communities in winning grants
GreenStep Cities, a Minnesota initiative, was designed to provide greater recognition to the state's communities for achievements in meeting sustainability standards and goals.
| Jan 5, 2012
Some ADA accessibility rules change in 2012
Some changes to the Americans with Disabilities Act go into effect beginning March 15, 2012.
| Jan 5, 2012
Ontario's stringent energy code has builders concerned over indoor air quality
Some Ontario builders are worried that new building code requirements with stricter energy efficiency measures could lead to poor indoor air quality.
| Jan 5, 2012
New law bars Defense Department from new LEED certifications
The Defense Department will not be allowed to use any money to certify its buildings LEED Gold or Platinum, under a law President Obama signed Dec. 31.
| Jan 5, 2012
Some ADA accessibility rules change in 2012
Some changes to the Americans with Disabilities Act go into effect beginning March 15, 2012.
| Jan 3, 2012
New SJI Rule on Steel Joists
A new rule from the Steel Joist Institute clarifies when local reinforcement of joists is required for chord loads away from panel points. SJI members offer guidance about how and when to specify loads.
| Dec 29, 2011
OSHA enforcing new fall hazard standards
OSHA is enforcing its new fall protection standards, as evidenced by a recent crackdown in New York.
| Dec 29, 2011
NRCA offers program on new fall-protection requirements
The National Roofing Contractors Association's (NRCA's) program "Roofing Industry Fall Protection from A to Z" will be held Feb. 21 during the organization's 125th Annual Convention.
