The American Architectural Manufacturers Association (AAMA) has released an updated document specifying test methods, specifications, and field checks used to evaluate the structural adequacy of wall systems and their ability to resist water penetration and air leakage. Other optional tests are also included.
AAMA 501-15 is intended to be referenced in laboratory and field testing methods for exterior wall systems composed of curtain walls, storefronts, and sloped glazing. It was previously updated in 2005.
According to José Colon (Architectural Testing), Chair of the AAMA 501 Update Task Group, the standard was recently updated to make sure all labs and product manufacturers are on the same page with procedures and with pass/fail criteria for certain parts of the standard. These document updates also take into consideration new technologies for equipment being used for testing.
“Historically, AAMA 501 has been the base standard for project specific test requirements,” says Colon. “More and more specifications are being written that are even longer than what is called out in AAMA 501.” This is especially the case in places with more detailed codes, like Miami-Dade County or the state of Florida in general, said Colon.
Related Stories
| Mar 8, 2012
Green buildings more resilient than conventionally built structures
A new study by the U.S. Green Building Council (USGBC) and the University of Michigan’s Taubman College of Architecture and Urban Planning suggests that structures built to green standards can advance building resiliency.
| Mar 1, 2012
LEED Platinum standard likely to mean net-zero energy by 2018
As LEED standards continue to rise, the top level, LEED Platinum, will likely mean net-zero energy construction by 2018.
| Mar 1, 2012
EPA beefs up stormwater discharge rule from construction projects
The U.S. Environmental Protection Agency (EPA) has now finalized its 2012 construction general permit (CGP) that authorizes stormwater discharges from construction projects that disturb one or more acres of land in the areas where EPA is the permitting authority.
| Mar 1, 2012
Regulators investigate structural failures during construction of two Ohio casinos
Regulators with the Occupational Safety & Health Administration and the city of Cincinnati are investigatingthe collapse of the second floor of Cincinnati's Horseshoe Casino as workers were pouring concrete.
| Mar 1, 2012
Is your project too small for LEED? Consider other green standards
There are many other recognized national, state and local programs that offer a variety of best management practices and sustainable design, construction and operating strategies.
| Mar 1, 2012
California bill aims to cut costs for commercial building energy retrofits
A bill in the California Assembly would allow the state to pool together property owners’ energy-retrofit loans.
| Feb 29, 2012
Carvalho appointed Shawmut Safety Director
He has been a driving force behind multiple safety-orientated initiatives at Shawmut, including Safety Week, the creation of an online safety manual, and the implementation of a new safety reporting and tracking system.
| Feb 23, 2012
Federal budget cuts put major building projects on hold
A plan to build the National Bio and Agro-Defense Facility in Kansas is among several major building projects in jeopardy after the Obama administration’s 2013 budget was unveiled. The budget would cut all construction spending for the facility.
