flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

AAMA releases new blast hazard mitigation specifications for vertical fenestration systems

AAMA releases new blast hazard mitigation specifications for vertical fenestration systems

Installation methods as important as products, association says


By Peter Fabris, Contributing Editor | November 17, 2014
Photo: AAMA
Photo: AAMA

The American Architectural Manufacturers Association (AAMA) has released AAMA 510-14, Voluntary Guide Specification for Blast Hazard Mitigation for Vertical Fenestration Systems. This document provides a guide for manufacturers, architects/specifiers, contractors, and building owners for specifying types of systems and services to meet the requirements of blast hazard mitigation.

Blast mitigation products are intended for the reduction of injuries and fatalities of occupants under defined blast criteria. The method of installing these products is as important as the product itself, and must be evaluated during testing and/or structural analysis, AAMA says.

 “Unlike most AAMA documents, this one is primarily designed to be a roadmap for architects to use as a reference guide and format for specifying hazard mitigation products,” says Dennis Kelly (Graham Architectural Products), Chair of the Security Hazard Mitigation for Fenestration Products Committee.

(http://www.aamanet.org/news/1/10/0/all/1114/aama-releases-new-specification-for-blast-hazard-mitigation-for-vertical-fenestration-systems)

Related Stories

Codes and Standards | Oct 5, 2017

California lawmakers pass bill that requires GCs to pay wages of sub employees if subs fail to pay

The measure will go into effect in January if the governor signs it.

Codes and Standards | Oct 4, 2017

Ambitious but realistic increase in clean energy would cut GHG emissions by 80% in the U.S.

NRDC report says goal can be achieved with existing tools.

Codes and Standards | Oct 3, 2017

Reducing duct leakage is focus on latest green building standards updates

ASHRAE 189.1 broadens testing requirements to include more types of ducts.

Codes and Standards | Oct 2, 2017

Nationwide retrofit strategy in Canada could cut 51% of emissions from large buildings

The roadmap provides government and industry with a targeted plan.

Codes and Standards | Sep 28, 2017

Resources available for new OSHA respirable crystalline silica regulation

NRCA offers compliance tools for contractors.

Codes and Standards | Sep 28, 2017

New tool compares HVAC system efficiency

IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.

Codes and Standards | Sep 26, 2017

Anti-drone technology can ward off unauthorized drone flights

The technology can be used to prevent terrorist attacks and spying.

Codes and Standards | Sep 25, 2017

How-to guide to renovating shopping centers available

E.U. research project focuses on energy efficiency and occupant comfort.

Codes and Standards | Sep 21, 2017

After construction crane collapses during Irma, regulations questioned

Cranes rated for 140 mph winds didn’t hold up to 100 mph gusts.

Codes and Standards | Sep 20, 2017

Energy efficiency measures pay off in some not-so-obvious ways

Access to better financing, tax incentives, rent premiums, among the benefits to greener buildings.

boombox1
boombox2
native1

More In Category


Resiliency

U.S. is reducing floodplain development in most areas

The perception that the U.S. has not been able to curb development in flood-prone areas is mostly inaccurate, according to new research from climate adaptation experts. A national survey of floodplain development between 2001 and 2019 found that fewer structures were built in floodplains than might be expected if cities were building at random.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021