flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

AAMA and WDMA release updated review and forecast that predicts industry trends

AAMA and WDMA release updated review and forecast that predicts industry trends

Significant volume is expected to return to the entry and interior door market as new construction demand is expected to grow at double-digit rates, outpacing remodeling and replacement activity as the housing market recovers.


By Posted by Tim Gregorski, Senior Editor | September 21, 2012
According to the study, new construction skylight activity has proven to be grea
According to the study, new construction skylight activity has proven to be greater than expected with double-digit growth perce
This article first appeared in the October 2012 issue of BD+C.

The American Architectural Manufacturers Association (AAMA) and the Window and Door Manufacturers Association (WDMA) have jointly released an update to the "2011/2012 U.S. Industry Statistical Review and Forecast." This report delivers timely information on window, door and skylight market trends and product relationships. Historic data for 2006 through 2011 and forecast data for 2012 through 2015 are also included in the report. Forecasts are based on projections of construction activity as of August 2012.

According to the updated study's data, multi-family and single family starts are expected to experience a slightly better increase than what was initially thought, up to 19 percent over 2011 with additional increases in 2013 and 2014. Residential improvement expenditures are expected to see a similar shift.

As of mid-year, residential skylights are tracking at a growth rate slightly higher than the 2011 volume. New construction skylight activity has proven to be greater than expected with double-digit growth percentages. Remodeling and replacement skylight activity has fallen behind initial expectations with only minor growth, though the replacement market is benefiting from weather-related replacement in the first half of the year.

The updated study continues to show little change in the segmentation for residential interior door material types over the next five years. However, significant volume is expected to return to the entry and interior door market as new construction demand is expected to grow at double-digit rates, outpacing remodeling and replacement activity as the housing market recovers.

Nonresidential construction declined slightly in 2011 and is forecasted to continue to remain slow through 2012, tempering growth in the nonresidential architectural interior door categories. However, the updated study predicts a slight improvement in architectural door shipments in 2012 over earlier forecasts. Lagging slightly behind the residential market, nonresidential construction is expected to rebound significantly in the subsequent three years through 2015.

Additional and more detailed information on the residential and commercial fenestration markets is contained in the "2011/2012 AAMA/WDMA Study of the U.S. Market for Windows, Doors and Skylights" (published in May 2012), which includes all of the items listed below.

  • "AAMA/WDMA U.S. Industry Statistical Review and Forecast" (August 2012 Update) summarizes residential, nonresidential and remodeling trends from government and industry sources.
  • "AAMA/WDMA U.S. Industry Channel Distribution Report" profiles the residential and nonresidential market for windows and doors as it flows through the identified distribution channels.
  • "AAMA/WDMA U.S. Industry Market Size Report" quantifies residential and nonresidential market volumes, both historic and projected.
  • "AAMA/WDMA U.S. Industry Regional Statistical Review and Forecasts" detail information for 11 individual regions.


The updated "2011/2012 U.S. Industry Statistical Review and Forecast," as well as the other reports listed above, are available for purchase online from both AAMA and WDMA. +

Related Stories

| Jan 4, 2011

Product of the Week: Zinc cladding helps border crossing blend in with surroundings

Zinc panels provide natural-looking, durable cladding for an administrative building and toll canopies at the newly expanded Queenstown Plaza U.S.-Canada border crossing at the Niagara Gorge. Toronto’s Moriyama & Teshima Architects chose the zinc alloy panels for their ability to blend with the structures’ scenic surroundings, as well as for their low maintenance and sustainable qualities. The structures incorporate 14,000 sf of Rheinzink’s branded Angled Standing Seam and Reveal Panels in graphite gray.

| Jan 4, 2011

6 green building trends to watch in 2011

According to a report by New York-based JWT Intelligence, there are six key green building trends to watch in 2011, including: 3D printing, biomimicry, and more transparent and accurate green claims.

| Jan 4, 2011

LEED standards under fire in NYC

This year, for the first time, owners of 25,000 commercial properties in New York must report their buildings’ energy use to the city. However, LEED doesn’t measure energy use and costs, something a growing number of engineers, architects, and landlords insist must be done. Their concerns and a general blossoming of environmental awareness have spawned a host of rating systems that could test LEED’s dominance.  

| Jan 4, 2011

LEED 2012: 10 changes you should know about

The USGBC is beginning its review and planning for the next version of LEED—LEED 2012. The draft version of LEED 2012 is currently in the first of at least two public comment periods, and it’s important to take a look at proposed changes to see the direction USGBC is taking, the plans they have for LEED, and—most importantly—how they affect you.

| Jan 4, 2011

California buildings: now even more efficient

New buildings in California must now be more sustainable under the state’s Green Building Standards Code, which took effect with the new year. CALGreen, the first statewide green building code in the country, requires new buildings to be more energy efficient, use less water, and emit fewer pollutants, among many other requirements. And they have the potential to affect LEED ratings.

| Jan 4, 2011

New Years resolutions for architects, urban planners, and real estate developers

Roger K. Lewis, an architect and a professor emeritus of architecture at the University of Maryland, writes in the Washington Post about New Years resolutions he proposes for anyone involved in influencing buildings and cities. Among his proposals: recycle and reuse aging or obsolete buildings instead of demolishing them; amend or eliminate out-of-date, obstructive, and overly complex zoning ordinances; and make all city and suburban streets safe for cyclists and pedestrians.

| Jan 4, 2011

An official bargain, White House loses $79 million in property value

One of the most famous office buildings in the world—and the official the residence of the President of the United States—is now worth only $251.6 million. At the top of the housing boom, the 132-room complex was valued at $331.5 million (still sounds like a bargain), according to Zillow, the online real estate marketplace. That reflects a decline in property value of about 24%.

| Jan 4, 2011

Luxury hotel planned for Palace of Versailles

Want to spend the night at the Palace of Versailles? The Hotel du Grand Controle, a 1680s mansion built on palace grounds for the king's treasurer and vacant since the French Revolution, will soon be turned into a luxury hotel. Versailles is partnering with Belgian hotel company Ivy International to restore the dilapidated estate into a 23-room luxury hotel. Guests can live like a king or queen for a while—and keep their heads.

| Jan 4, 2011

Grubb & Ellis predicts commercial real estate recovery

Grubb & Ellis Company, a leading real estate services and investment firm, released its 2011 Real Estate Forecast, which foresees the start of a slow recovery in the leasing market for all property types in the coming year.

| Jan 4, 2011

Furniture Sustainability Standard - Approved by ANSI and Released for Distribution

BIFMA International recently announced formal American National Standards Institute (ANSI) approval and release of the ANSI/BIFMA e3-2010 Furniture Sustainability Standard. The e3 standard represents a structured methodology to evaluate the "sustainable" attributes of furniture products and constitutes the technical criteria of the level product certification program.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021