flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

6 innovative products for multifamily developments

Products and Materials

6 innovative products for multifamily developments

Efficient products make for efficient buildings. What are some innovative products to come out of 2022?


By Robert Cassidy, Executive Editor | January 18, 2023
High-rise glass building with solar R100 glass
This 164-condo Austin high-rise features floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. Photo courtesy Albert Vecerka/Esto

Each year, new products come on the market that solve developmental pain-points. Here are six innovative products for various multifamily developments, including a condominium-wide smart electrical system, heavy-duty aluminum doors, and prefabricated panels.

1. Solarban R100 (Architectural glass that counters the strong Texas sun)
 

Architectural glass counters strong Texas sun
Photo courtesy Albert Vecerka/Esto

Austin's new 34-story 70 Rainey houses 164 condos featuring floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. "Glazing selection on tall buildings is one of the most complicated design decisions we face today to navigate energy codes, aesthetics, and environmental performance," said Joshua Coleman, AIA, LEED AP, Principal/Design at Page architecture firm. "Solarban R100 glass provides one of the best solar heat gain coefficients on the market without being overly reflective, too dark, or tinted." Win-Con was the glazier.

 

2. Leviton Decora smart devices (Smart electrical systems for luxury residences in upstate N.Y.)
 

Smart electrical systems for luxury New York residence
Photo courtesy Leviton

Bonacio Construction (GC) and Prediletto Electric (electrical contractor) specified Leviton Smart Circuit Breakers and Leviton USB Type A/Type-C In-Wall Outlet Charger with 15A Tamper-Resistant Outlet for The Moderne Condominiums, Sarasota Springs, N.Y. Leviton Decora Smart Dimmers were installed in the living rooms, kitchens, and dining rooms of the two- and three-bedroom condos and in the penthouse units.

 

3. Omega-Lite ACM panels (Philadelphia apartment building clad in ACM panels)
 

Philadelphia apartment building clad in ACM panels
Photo courtesy Makosh Services, Laminators

For the exterior of SOLO on Chestnut, a seven-story, 250,000-sf complex of 280 luxury apartments near the University of Pennsylvania and Drexel University, JKRP Architects (designer) and The HOW Group (GC) specified 14,600 sf of Charcoal Grey Omega-Lite ACM panels. Makosh Services used Laminators' Clip & Caulk installation system.

 

4. Aluminum Swing Terrace Door (Aluminum door for high-rise, high-wind applications)
 

Aluminum door for high-rise, high-wind applications
Photo courtesy Crystal Window & Door Systems

Crystal Window & Door Systems' Series 1450/1460 Aluminum Swing Terrace Door has been structurally and thermally enhanced and offers a new hydraulic closer, glazing, and a laboratory water-tested ADA low-sill option. The Series 1450/1460 Terrace Door is constructed with heavy-duty 0.093-inch wall thickness extrusion and a redesigned strong multi-chamber 3.25-inch jamb frame, for use in high-rise and wind-prone installations.

A powerful adjustable hydraulic closer from leading German hardware manufacturer G-U (Gretsch-Unitas) features a concealed mounting plate and slide arm assembly designed for outswing door operation, which allows effortless operation of the door while maintaining the door’s sleek look on the interior. The aluminum frame of Crystal’s Series 1450/1460 Aluminum Swing Terrace Door is finished in durable environmentally sustainable powder coat paint, to either AAMA 2604 or 2605 performance standards.

 

5. Centerline Prefab uses Sto prefab panels to save time on WMU student housing complex
 

Prefabricated panels being put onto student housing development
Photo courtesy Centerline Prefab

Centerline Prefab set 48-foot StoPanel Metal ci panels on the upper four floors and Sto Backup panels for the six-story Arcadia Flats residential housing at Western Michigan University, in Kalamazoo. The 206 wall panels were prefabricated off site and installed on site in 37 minutes per panel. Stantec Architecture (architect) and Triangle Associates (GC) were on the project team.

 

6. Atlas ACFoam (Roofing system that prevents ice jams in Colorado project)
 

Roofing system preventing ice jams in Colorado development
Photo courtesy Atlas Roofing Corp.

Jeff Johnston, president of The Roofing Company, Granby, Colo., installed more than 210 squares of Atlas ACFoam and ACFoam CrossVent from Atlas Roofing Corp. on the roof of the nine residences and six penthouses ($7.4 million to $9.6 million) at the Vail Mountain View Condos, in Vail Village. The roofing system provided a fully continuous insulation solution with an R-value of 20.

Related Stories

| Aug 11, 2010

AIA Course: Enclosure strategies for better buildings

Sustainability and energy efficiency depend not only on the overall design but also on the building's enclosure system. Whether it's via better air-infiltration control, thermal insulation, and moisture control, or more advanced strategies such as active façades with automated shading and venting or novel enclosure types such as double walls, Building Teams are delivering more efficient, better performing, and healthier building enclosures.

| Aug 11, 2010

Glass Wall Systems Open Up Closed Spaces

Sectioning off large open spaces without making everything feel closed off was the challenge faced by two very different projects—one an upscale food market in Napa Valley, the other a corporate office in Southern California. Movable glass wall systems proved to be the solution in both projects.

| Aug 11, 2010

AIA course: MEP Technologies For Eco-Effective Buildings

Sustainable building trends are gaining steam, even in the current economic downturn. More than five billion square feet of commercial space has either been certified by the U.S. Green Building Council under its Leadership in Energy and Environmental Design program or is registered with LEED. It is projected that the green building market's dollar value could more than double by 2013, to as muc...

| Aug 11, 2010

BIM adoption tops 80% among the nation's largest AEC firms, according to BD+C's Giants 300 survey

The nation's largest architecture, engineering, and construction companies are on the BIM bandwagon in a big way, according to Building Design+Construction's premier Top 50 BIM Adopters ranking, published as part of the 2009 Giants 300 survey. Of the 320 AEC firms that participated in Giants survey, 83% report having at least one BIM seat license in house, half have more than 30 seats, and near...

| Aug 11, 2010

Thrown For a Loop in China

While the Bird's Nest and Water Cube captured all the TV coverage during the Beijing Olympics in August, the Rem Koolhaas-designed CCTV Headquarters in Beijing—known as the “Drunken Towers” or “Big Shorts,” for its unusual shape—is certain to steal the show when it opens next year.

| Aug 11, 2010

Tall ICF Walls: 9 Building Tips from the Experts

Insulating concrete forms have a long history of success in low-rise buildings, but now Building Teams are specifying ICFs for mid- and high-rise structures—more than 100 feet. ICF walls can be used for tall unsupported walls (for, say, movie theaters and big-box stores) and for multistory, load-bearing walls (for hotels, multifamily residential buildings, and student residence halls).

| Aug 11, 2010

Financial Wizardry Builds a Community

At 69 square miles, Vineland is New Jersey's largest city, at least in geographic area, and it has a rich history. It was established in 1861 as a planned community (well before there were such things) by the utopian Charles Landis. It was in Vineland that Dr. Thomas Welch found a way to preserve grape juice without fermenting it, creating a wine substitute for church use (the town was dry).

| Aug 11, 2010

World's tallest all-wood residential structure opens in London

At nine stories, the Stadthaus apartment complex in East London is the world’s tallest residential structure constructed entirely in timber and one of the tallest all-wood buildings on the planet. The tower’s structural system consists of cross-laminated timber (CLT) panels pieced together to form load-bearing walls and floors. Even the elevator and stair shafts are constructed of prefabricated CLT.

| Aug 11, 2010

Integrated Project Delivery builds a brave, new BIM world

Three-dimensional information, such as that provided by building information modeling, allows all members of the Building Team to visualize the many components of a project and how they work together. BIM and other 3D tools convey the idea and intent of the designer to the entire Building Team and lay the groundwork for integrated project delivery.

| Aug 11, 2010

Let There Be Daylight

The new public library in Champaign, Ill., is drawing 2,100 patrons a day, up from 1,600 in 2007. The 122,600-sf facility, which opened in January 2008, certainly benefits from amenities that the old 40,000-sf library didn't have—electronic check-in and check-out, new computers, an onsite coffeehouse.

boombox1
boombox2
native1

More In Category




Products and Materials

Top products from AIA 2024

This month, Building Design+Construction editors are bringing you the top products displayed at the 2024 AIA Conference on Architecture & Design. Nearly 550 building product manufacturers showcased their products—here are 17 that caught our eye.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021