flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

6 innovative products for multifamily developments

Products and Materials

6 innovative products for multifamily developments

Efficient products make for efficient buildings. What are some innovative products to come out of 2022?


By Robert Cassidy, Executive Editor | January 18, 2023
High-rise glass building with solar R100 glass
This 164-condo Austin high-rise features floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. Photo courtesy Albert Vecerka/Esto

Each year, new products come on the market that solve developmental pain-points. Here are six innovative products for various multifamily developments, including a condominium-wide smart electrical system, heavy-duty aluminum doors, and prefabricated panels.

1. Solarban R100 (Architectural glass that counters the strong Texas sun)
 

Architectural glass counters strong Texas sun
Photo courtesy Albert Vecerka/Esto

Austin's new 34-story 70 Rainey houses 164 condos featuring floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. "Glazing selection on tall buildings is one of the most complicated design decisions we face today to navigate energy codes, aesthetics, and environmental performance," said Joshua Coleman, AIA, LEED AP, Principal/Design at Page architecture firm. "Solarban R100 glass provides one of the best solar heat gain coefficients on the market without being overly reflective, too dark, or tinted." Win-Con was the glazier.

 

2. Leviton Decora smart devices (Smart electrical systems for luxury residences in upstate N.Y.)
 

Smart electrical systems for luxury New York residence
Photo courtesy Leviton

Bonacio Construction (GC) and Prediletto Electric (electrical contractor) specified Leviton Smart Circuit Breakers and Leviton USB Type A/Type-C In-Wall Outlet Charger with 15A Tamper-Resistant Outlet for The Moderne Condominiums, Sarasota Springs, N.Y. Leviton Decora Smart Dimmers were installed in the living rooms, kitchens, and dining rooms of the two- and three-bedroom condos and in the penthouse units.

 

3. Omega-Lite ACM panels (Philadelphia apartment building clad in ACM panels)
 

Philadelphia apartment building clad in ACM panels
Photo courtesy Makosh Services, Laminators

For the exterior of SOLO on Chestnut, a seven-story, 250,000-sf complex of 280 luxury apartments near the University of Pennsylvania and Drexel University, JKRP Architects (designer) and The HOW Group (GC) specified 14,600 sf of Charcoal Grey Omega-Lite ACM panels. Makosh Services used Laminators' Clip & Caulk installation system.

 

4. Aluminum Swing Terrace Door (Aluminum door for high-rise, high-wind applications)
 

Aluminum door for high-rise, high-wind applications
Photo courtesy Crystal Window & Door Systems

Crystal Window & Door Systems' Series 1450/1460 Aluminum Swing Terrace Door has been structurally and thermally enhanced and offers a new hydraulic closer, glazing, and a laboratory water-tested ADA low-sill option. The Series 1450/1460 Terrace Door is constructed with heavy-duty 0.093-inch wall thickness extrusion and a redesigned strong multi-chamber 3.25-inch jamb frame, for use in high-rise and wind-prone installations.

A powerful adjustable hydraulic closer from leading German hardware manufacturer G-U (Gretsch-Unitas) features a concealed mounting plate and slide arm assembly designed for outswing door operation, which allows effortless operation of the door while maintaining the door’s sleek look on the interior. The aluminum frame of Crystal’s Series 1450/1460 Aluminum Swing Terrace Door is finished in durable environmentally sustainable powder coat paint, to either AAMA 2604 or 2605 performance standards.

 

5. Centerline Prefab uses Sto prefab panels to save time on WMU student housing complex
 

Prefabricated panels being put onto student housing development
Photo courtesy Centerline Prefab

Centerline Prefab set 48-foot StoPanel Metal ci panels on the upper four floors and Sto Backup panels for the six-story Arcadia Flats residential housing at Western Michigan University, in Kalamazoo. The 206 wall panels were prefabricated off site and installed on site in 37 minutes per panel. Stantec Architecture (architect) and Triangle Associates (GC) were on the project team.

 

6. Atlas ACFoam (Roofing system that prevents ice jams in Colorado project)
 

Roofing system preventing ice jams in Colorado development
Photo courtesy Atlas Roofing Corp.

Jeff Johnston, president of The Roofing Company, Granby, Colo., installed more than 210 squares of Atlas ACFoam and ACFoam CrossVent from Atlas Roofing Corp. on the roof of the nine residences and six penthouses ($7.4 million to $9.6 million) at the Vail Mountain View Condos, in Vail Village. The roofing system provided a fully continuous insulation solution with an R-value of 20.

Related Stories

| Aug 11, 2010

See what $3,000 a month will get you at Chicago’s Aqua Tower

Magellan Development Group has opened three display models for the rental portion of Chicago’s highly anticipated Aqua Tower, designed by Jeanne Gang. Lease rates range from $1,498 for a studio to $3,111 for a two-bedroom unit with lake views.

| Aug 11, 2010

Construction employment declines in 48 states in August compared to last year

Construction employment saw significant declines in all but two states this August compared to last year according to an analysis of new state-by-state employment figures released today by the federal government.  The analysis, conducted by the Associated General Contractors of America, however did show that the number of states gaining construction jobs increased slightly in August compared to July 2009.

| Aug 11, 2010

LEED 2009 cites FloorScore Certification as indicator of indoor air quality

The U.S. Green Building Council (USGBC) has cited FloorScore® certified flooring products as eligible for credits under the new LEED 2009 Version 3 guidelines. Reflecting the inclusion of FloorScore, the new LEED IEQ Credit 4.3 for Low-Emitting Materials has been expanded from “Carpet Systems” to “Flooring Systems” to include hard surface flooring.

| Aug 11, 2010

BIM adoption rate exceeds 80% among nation’s largest AEC firms

The nation’s largest architecture, engineering, and construction companies are on the BIM bandwagon in a big way, according to Building Design+Construction’s premier Top 170 BIM Adopters ranking, published as part of the 2009 Giants 300 survey. Of the 320 AEC firms that participated in Giants survey, 83% report having at least one BIM seat license in house, and nearly a quarter (23%) have 100-plus seats.

| Aug 11, 2010

New air-conditioning design standard allows for increased air speed to cool building interiors

Building occupants, who may soon feel cooler from increased air movement, can thank a committee of building science specialists. The committee in charge of ANSI/ASHRAE Standard 55 - Thermal Environmental Conditions for Human Occupancy—after months of study and discussion--has voted recently to allow increased air speed as an option for cooling building interiors.  In lay terms, increased air speed is the equivalent of turning up the fan.

| Aug 11, 2010

PCA partners with MIT on concrete research center

MIT today announced the creation of the Concrete Sustainability Hub, a research center established at MIT in collaboration with the Portland Cement Association (PCA) and Ready Mixed Concrete (RMC) Research & Education Foundation.

| Aug 11, 2010

Study explains the financial value of green commercial buildings

Green building may be booming, especially in the Northwest, but the claims made for high-performance buildings have been slow to gain traction in the financial community. Appraisers, lenders, investors and brokers have found it difficult to confirm the value of high-performance green features and related savings. A new study of office buildings identifies how high-performance green features and systems can increase the value of commercial buildings.

| Aug 11, 2010

Architecture Billings Index flat in May, according to AIA

After a slight decline in April, the Architecture Billings Index was up a tenth of a point to 42.9 in May. As a leading economic indicator of construction activity, the ABI reflects the approximate nine to twelve month lag time between architecture billings and construction spending. Any score above 50 indicates an increase in billings.

boombox1
boombox2
native1

More In Category



Curtain Wall

7 steps to investigating curtain wall leaks

It is common for significant curtain wall leakage to involve multiple variables. Therefore, a comprehensive multi-faceted investigation is required to determine the origin of leakage, according to building enclosure consultants Richard Aeck and John A. Rudisill with Rimkus. 


halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021