flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

6 innovative multifamily products

Products and Materials

6 innovative multifamily products

6 new products to help put the finishing touches on any multifamily project.


By MFDC Staff | August 29, 2018

 

1. MINIMAL HARDWARE CREATES A  SLIDING SHOWER DOOR WITH A MODERN AESTHETIC

The Cambridge Bypass Sliding Shower Door System from C.R. Laurence features a double-bypass configuration that allows for entry from the left or right side. Minimal hardware creates a modern aesthetic. Stainless steel rollers (inset) yield smooth door operation. The stainless steel design can be installed on full standing showers or onto bathtubs. Maximum door width: 37 inches; maximum door weight: 84 pounds.

 

2. ALL-IN-ONE WASHER-DRYER saves SPACE in smaller units

The Whirlpool Smart All-In-One Care Washer and Dryer allows a single laundry load to be completely washed and dried in the same machine. The ventless unit can fit under kitchen counters or in closets, laundry rooms, and bathrooms. Comes with Amazon Alexa and Apple Watch compatibility. The Whirlpool mobile app can provide alert notifications to the tenant’s smartphone.

 

3. LOW-MAINTENANCE ROOFTOP DECK BEAUTIFIES WASHINGTON’S APOLLO APARTMENTS

Built on the site of the Apollo Theater in the District of Columbia, the Apollo Apartments complex has over 350 rentals, a Whole Foods, and a landscaped rooftop terrace. The project’s landscape designer, Landscape Architecture Bureau, specified Kebony modified wood for the terrace pergola for its low-maintenance properties and the natural silver patina it develops over time. Kebony wood was also used for the decking and benches throughout the project.

 

4. METAL ROOF AIDS SENIOR LIVING FACILITY’S THERMAL AND WIND RESISTANCE

The one-story roof of the three-story Ridge Senior Living facility in Salt Lake City dominates the view from most resident’s windows. The project team—AJC Architects, Sahara Construction, and Capitol Roofing—decided to use the MBCI SuperLok 16-inch metal panel roofing system on the first-story roof for its clean aesthetic design and thermal and wind resistance. The mechanically field-seamed, vertical leg standing seam roof system provides exceptional resistance to wind uplift and the option to add insulation to the existing roof.

 

5. NEW BATHROOM DESIGN SERIES PROVIDES A FRESH TAKE ON THE CLASSIC RECTANGULAR SHAPE

The new DuraSquare collection from Duravit features ceramics and a fresh take on furniture. The collection’s washbasin has walls that are only 3/16-inch thick thanks to its DuraCeram construction. Complementing the washbasins is the DuraSquare vanity. The console frame is height-adjustable and available in silver (chrome) or matte black. The furniture frame includes a glass shelf (available in six colors) and a towel rack. Bathtubs round out the collection and mimic the shape of the washbasins.

 

6. BUILT-IN MODULES CONCEAL COMPLETE KITCHENS

The YesterTec Stealth Kitchen System hides complete kitchens in built-in modules to create a minimalist look or maximize the efficiency of a small space. The modules look like built-in cabinetry and come in a variety of finish options. The stealth kitchens are suited for apartments, game rooms, and entertainment areas. The modules can be configured into an L-shape or galley kitchen, as a straight line, or with a peninsula. Units are 29 inches deep.

Related Stories

| Aug 11, 2010

BIM adoption rate exceeds 80% among nation’s largest AEC firms

The nation’s largest architecture, engineering, and construction companies are on the BIM bandwagon in a big way, according to Building Design+Construction’s premier Top 170 BIM Adopters ranking, published as part of the 2009 Giants 300 survey. Of the 320 AEC firms that participated in Giants survey, 83% report having at least one BIM seat license in house, and nearly a quarter (23%) have 100-plus seats.

| Aug 11, 2010

New air-conditioning design standard allows for increased air speed to cool building interiors

Building occupants, who may soon feel cooler from increased air movement, can thank a committee of building science specialists. The committee in charge of ANSI/ASHRAE Standard 55 - Thermal Environmental Conditions for Human Occupancy—after months of study and discussion--has voted recently to allow increased air speed as an option for cooling building interiors.  In lay terms, increased air speed is the equivalent of turning up the fan.

| Aug 11, 2010

PCA partners with MIT on concrete research center

MIT today announced the creation of the Concrete Sustainability Hub, a research center established at MIT in collaboration with the Portland Cement Association (PCA) and Ready Mixed Concrete (RMC) Research & Education Foundation.

| Aug 11, 2010

Study explains the financial value of green commercial buildings

Green building may be booming, especially in the Northwest, but the claims made for high-performance buildings have been slow to gain traction in the financial community. Appraisers, lenders, investors and brokers have found it difficult to confirm the value of high-performance green features and related savings. A new study of office buildings identifies how high-performance green features and systems can increase the value of commercial buildings.

| Aug 11, 2010

Architecture Billings Index flat in May, according to AIA

After a slight decline in April, the Architecture Billings Index was up a tenth of a point to 42.9 in May. As a leading economic indicator of construction activity, the ABI reflects the approximate nine to twelve month lag time between architecture billings and construction spending. Any score above 50 indicates an increase in billings.

| Aug 11, 2010

Free-span solar energy system installed at REM Eyewear headquarters

The first cable-suspended free-span solar energy system was completed today over the REM Eyewear headquarters parking lot in Sun Valley, Calif. The patented, cable-supported photovoltaic system created by P4P Energy is expected to generate 40,877 kilowatt-hours of renewable electricity per year, enough to power five to six single family homes and to prevent 1.5 million pounds of carbon from being released into the atmosphere.

| Aug 11, 2010

Architecture Billings Index drops to lowest level since June

Another stall in the recovery for the construction industry as the Architecture Billings Index (ABI) dropped to its lowest level since June. The American Institute of Architects (AIA) reported the August ABI rating was 41.7, down slightly from 43.1 in July. This score indicates a decline in demand for design services (any score above 50 indicates an increase in billings).

| Aug 11, 2010

Construction employment declined in 333 of 352 metro areas in June

Construction employment declined in all but 19 communities nationwide this June as compared to June-2008, according to a new analysis of metropolitan-area employment data released today by the Associated General Contractors of America.  The analysis shows that few places in America have been spared the widespread downturn in construction employment over the past year.

| Aug 11, 2010

Jacobs, Hensel Phelps among the nation's 50 largest design-build contractors

A ranking of the Top 50 Design-Build Contractors based on Building Design+Construction's 2009 Giants 300 survey. For more Giants 300 rankings, visit http://www.BDCnetwork.com/Giants

| Aug 11, 2010

Construction unemployment rises to 17.1% as another 64,000 construction workers are laid off in September

The national unemployment rate for the construction industry rose to 17.1 percent as another 64,000 construction workers lost their jobs in September, according to an analysis of new employment data released today.  With 80 percent of layoffs occurring in nonresidential construction, Ken Simonson, chief economist for the Associated General Contractors of America, said the decline in nonresidential construction has eclipsed housing’s problems.

boombox1
boombox2
native1

More In Category

Products and Materials

Top products from AIA 2024

This month, Building Design+Construction editors are bringing you the top products displayed at the 2024 AIA Conference on Architecture & Design. Nearly 550 building product manufacturers showcased their products—here are 17 that caught our eye.




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021