Â
Outpatient facilities have become the darlings of the healthcare construction sector in recent years. By even the most conservative measure, spending on outpatient construction is expected to grow anywhere from 20-30% in the next decade.
âIn the early 1990s, outpatient care accounted for only 10 to 15% of hospital revenue; today, itâs closer to 60%,â says Patrick Duke, Senior Vice President with KLMK Group, Richmond, Va. âItâs a shift thatâs been happening across the board, sweeping along academic medical centers, community hospitals, for-profit chains, and not-for-profit providers alike,â says Duke, a Building Design+Construction â40 Under 40â honoree. âAnd itâs showing no sign of slowing, especially with advancements in care and changing reimbursement patterns.â
This shift in service modes should not be surprising. Outpatient facilities typically allow healthcare organizations and physician groups to deliver care at lower cost than can be done in inpatient environments. They are generally less expensive to design, build, operate, and maintain, which translates to higher profits for their owners. And with the Affordable Care Act on the horizon, demand for outpatient care facilities is likely to accelerate.
What healthcare clients are demanding from Building Teams
1. EXPECT DEMAND for easily reconfigurable spaces in outpatient facilities to be on the rise.
2. BE PREPARED to rethink the conventional wisdom about underfloor air systems in healthcare facilities.
3. LOOK FORWARD to heightened scrutiny of facility quality and operational performance.
4. ANTICIPATE greater pressure from clients for you to deliver âaffordable elegance.â
5. WATCH FOR healthcare providers to put you on a âLeanâ diet.
However, these kinds of projects are becoming increasingly difficult to execute, as healthcare clients see outpatient environments as a means not only to deliver better patient outcomes and experiences, but also as a way to provide flexibility to meet their own rapidly changing organizational needs and strategies.
Building Design+Construction combed the healthcare design and construction sector to evaluate the latest developments in outpatient facility designs. Here are five radical trends to watch.
Â
Â
Â
1. Expect demand for easily reconfigurable spaces in outpatient facilities to be on the rise.
Â
At the Spectrum Health ambulatory center, exam and procedure rooms are located at the center of the plan, rather than at the perimeter, to create a more reconfigurable environment. Interior exam rooms receive daylight through clerestory windows. Designers from Integrated Architecture used mockups to test room configurations. Photo: Justin Maconochie
Â
Like most large healthcare providers, Spectrum Health System. a seven-hospital nonprofit system in Grand Rapids, Mich., is constantly struggling to stay ahead of changing conditions in the healthcare field. With more than two-dozen inpatient and outpatient locations throughout Michigan, having to deal with this moving target puts a huge burden on Spectrumâs facilities.
On average, Spectrum makes a major renovation to its spaces every four years. âIn some cases, theyâre touching spaces every two years,â says Michael Corby, FAIA, LEED AP, Executive Vice President with Integrated Architecture, Grand Rapids, who has worked on multiple projects for Spectrum. âIt is extremely costly, as you can imagine.â
To reduce both costs and the noise, dust, and disruption associated with renovation work, while simultaneously enhancing operational efficiency, work environments, and patient experience, Spectrum Health commissioned Integrated Architecture to develop a highly flexible, reconfigurable outpatient facility model.
The designers tested a number of physical mockups to get the optimal configuration, which turned out to be a 9x12-foot patient exam room. âOnce we got the exam room piece resolved, we started to build on that,â says Corby.
All other spaces became increments of the exam room module: a procedure room becomes one-and-a-half times the size of an exam room; a utility room becomes half the size of an exam roomââso they can replace an exam room with, letâs say, two utility room modules,â says Corby.
Corby says the team put the design scheme to the test halfway into the construction documentation process, when Spectrum decided to shift its care groups around. âImagine that, halfway into the planning, the client says to you, âWeâre going to move primary care up here and subspecialists over there,â it would have been disastrous under a traditional planning process,â he says. âBut because of the modularity, it took us all of 60 minutes to redo the floor plan.â
The resulting design scheme was first applied at Spectrum Health Medical Groupâs new ambulatory center in Holland, Mich., and is currently being replicated at several other outpatient centers in Spectrumâs network. The 58,000-sf facility follows a consolidated delivery model, where both primary-care providers and subspecialists are housed under a single roof. âThis has been done before, but what is unusual is the fact that they wanted the mix to not be limited by the facility,â says Corby.
To achieve the kind of flexibility of spatial use that the client wanted, Integrated Architecture had to depart from more traditional outpatient facility plans. For instance, the exam rooms are located in the central core of the facility instead of at the perimeter. With its open-plan configuration, the facility incorporates underlying modularity that allows patient rooms, workspaces, conference rooms, and other spaces to change in function, location, and dimension as needed, without the need for intense renovation.
The floor plan for Spectrumâs Holland, Mich., facility was organized around the dimensions of the exam rooms (green), which were optimized at 9X12 feet using physical mockups. The resulting 30-foot-wide bays responded to the unit size of the exam rooms. All other rooms, including procedure rooms (large green) and utility spaces (blue), became multiples of the exam room module.Â
CLICK TO ENLARGE PLAN - FIRST LEVEL
CLICK TO ENLARGE PLAN - SECOND LEVEL
Â
[pagebreak]
2. Be prepared to rethink the conventional wisdom about underfloor air systems in healthcare facilities.
Â
Underfloor air distribution is one of the design innovations at the new Spectrum Health Medical Groupâs ambulatory center, in Holland, Mich. The UFAD scheme reduces energy consumption and allows the spaces to be reconfigured without dramatic renovation costs. Photo: Justin Maconochie
Â
How do you make a roomful of healthcare design and infection control experts utter a collective gasp? Simple. Just mention âhealthcareâ and âUFADâ in the same sentence.
Thatâs what happened when Corby presented underfloor air distribution for the new Spectrum Health facility to a group of healthcare professionals last fall. âFor a lot of people, especially those who are involved with infection control, it scares them,â says Corby.
He insists that UFAD is safe for outpatient care facilities like the one in Holland, Mich. âSpectrumâs infection control experts checked it out and found no inherent issues from an infection control standpoint,â he says. âItâs actually healthier, because the air is coming to the occupants in its freshest state. Youâre not mixing the stale air thatâs rising through the ductwork.â
However, Alan Kranzo, Spectrumâs Director of Facility Planning and Operations, cautions that the technology may not be appropriate for every outpatient facility. âThe Spectrum facility was an ambulatory patient visit environment, where theyâre just doing patient exams,â he says. âWe would never consider UFAD in an operating room, where procedures are being done.â
In pitching the idea of using UFAD to Spectrum management, Corby and his team analyzed the average cost and operational impact of recent renovations at the organizationâs other facilities. âWe showed them that, had these facilities had UFAD, they would have saved 30% on average of the cost of the renovation, because they would not have had to core through floors, shut down operations, and affect the surrounding areas,â he says.
In fact, underfloor air distribution (in combination with Spectrumâs modular facility plan) has enabled the organization to change out spaces much faster and at lower cost, without dramatically affecting daily operations.
The technology pencils out on the initial cost side, too. The entire Spectrum facility uses UFAD, at a first cost of $6-7/sf. But when the upfront savings on mechanical system components (less ductwork, smaller fans, etc.) is factored in, the investment is a wash, says Corby. On top of that, the projectâs energy models show that UFAD will deliver anywhere from 20 to 30% savings in ongoing energy costs.
Corby expects to see more healthcare organizations give UFAD a closer look as they search for ways to create more flexible and adaptable outpatient spaces. âI think itâs revolutionary as it is related to healthcare,â says Corby, who has done four UFAD applications for healthcare clients.
Â
[pagebreak]
3. Look forward to heightened scrutiny of facility quality and operational performance.
Â
To ensure all its facilities meet benchmark levels of quality for patient experience and operational and facility performance, Spectrum Healthâs facilities team developed a prescriptive-based facility assessment tool. Using the tool, they score their facilities on everything from the quality of the furnishings to the distance a patient walks from the parking lot. Photo: Justin Maconochie
Â
No other building sector is more keenly focused on the performance and continual assessment and improvement of its buildings than healthcare. This emphasis on quality will be further emphasized with the coming implementation of the Affordable Care Act, which is expected to place heavy pressure on healthcare providers to take a cleaver, not a surgical knife, to operating costs. That means outpatient care centers will have to deliver more careâand higher-quality careâat less cost.
âThereâs no doubt that physician groups are more closely analyzing how to turn over the outpatient exam rooms,â says Brian McFarlane, AIA, Principal in HKSâs Healthcare Group, in Dallas, who leads the firmâs healthcare business development. Already, outpatient clients are using kiosks for check-ins, and theyâre administering injections outside of exam rooms to eliminate bottlenecks in patient flow and speed up turnover of exam rooms.
âLess time in exam rooms may mean fewer rooms required or less square footage, which means lower rent for each physician, operational savings, and increased revenue. Itâs real money,â he says. âThe perfect situation is when a patient parks the car, walks in the door, quickly checks in via kiosk or in person, and goes directly to an exam room.â
What, then, does this heightened emphasis on quality and proof of performance mean for Building Teams working on outpatient facilities?
You can expect greater scrutiny of the quality of your work, especially as it pertains to the efficiency, flexibility, and profitabilityânot to mention the patient experienceâof outpatient facilities. Physical mockups and computer simulations are great, but the end product must perform up to expectations and be able to flex as the clientâs needs change.
To help assess the design and performance of its buildings, Spectrum Healthâs facilities team, assisted by Integrated Architectureâs Kranzo, created a prescriptive-based facility assessment tool that scores everything from the patientâs experience as they approach and enter the facility, to the quality of the work environment for physicians and staff, to the performance of both the operations and the building itself.
Typical questions: Is the reception area clearly visible immediately upon entering the building? Are there landscaped areas at or near the entry? Are there preferred views from and natural light in 75% of the hospitality area? How visible is the exterior signage from the primary access road? How effective are the primary landmark elements in wayfinding? What is the quality of the furnishings?
Kranzo says his team created the scorecard in an effort to develop facilities that are as balanced as possible across the multiple categories. The prescriptive criteria were developed based on evaluations of three recently renovated ambulatory centers, and were used to inform the design of the new Holland facility.
âIt really came out of us trying to measure the quality of a design as part of our final approval process of a construction document,â says Kranzo. âWeâre not going to focus just on the facility performance. Weâre going to rate operational efficiency as well as the experiential side for the patients and staff.â
Before Kranzo signs off on a CD for new construction or a renovation, a design must achieve a certain score level. Most elements are scored using a plus-three, minus-three system, allowing for gradations and some interpretation.
The goal, says Kranzo, is to âhave zeros across the board.â This ensures that no single element is drastically underdesigned or overdesigned. âWe found that some facilities go overboard in certain areas, such as finishes being well beyond what we need,â he says. âThis standard works to balance everything. That then feeds how we utilize our capital and budget on a given project.â
In a somewhat unusual move for a healthcare facility, Spectrum Health placed the physician and administrative workspaces along the perimeter of the structure, thus providing staff with the best daylight and views for completing medical documentation and reports. Photo: Justin Maconochie
Â
[pagebreak]
4. Anticipate greater pressure from clients for you to deliver âaffordable elegance.â
Â
To keep costs to a minimum and deliver what the client termed âaffordable elegance,â the Building Team for the Everett Clinicâs new Smokey Point (Wash.) Medical CenterâZGF Architects (designer), Coughlin Porter Lundeen (structural engineer), Affiliated Engineers (MEP engineer), and J.R. Abbott Construction (GC)âused tilt-up concrete for the shell of the structure. The move saved an estimated $160,000 in construction and material costs. Photo: Benjamin Benschneider
Â
As if delivering highly efficient, flexible, and patient-focused facilities wasnât difficult enough, Building Teams can look forward to having clients up the ante on exterior and interior architecture schemes. As healthcare institutions and physician groups compete for outpatient business, theyâre increasingly leaning on their facilities to help attract and retain both patients and employees, while keeping budgets tight for designing and constructing outpatient facilities.
To deliver world-class facilities on constrained budgets, Building Teams are getting creative in the selection of materials, finishes, and construction methods.
Take, for example, the Everett Clinicâs new Smokey Point (Wash.) Medical Center. The two-story, 60,000-sf facility was built for around $200/sfââa budget that is unheard of for this building type,â says Anita Rossen, Senior Healthcare Interior Designer with ZGF Architects, the projectâs architect. âBecause they are physician-owned, cost was a huge factor. The term their CEO used throughout the design and planning process was âaffordable elegance.ââ
Rossen says the Building Team, which included contractor J.R. Abbott Construction, Seattle, MEP engineer Affiliated Engineers, Chicago, and structural engineer Coughlin Porter Lundeen, Seattle, identified dozens of alternative design and construction approaches and materials and finishes that resulted in more than $350,000 in upfront savings.
The most startling of these was the use of tilt-up concrete construction for the shell of the structureâa construction method that is more popularly associated with big-box stores and warehouses than modern healthcare facilities. The move saved an estimated $160,000 in construction and material costs, according to Michael Sloane, LEED GA, Project Engineer with J.R. Abbott.
âTilt-panel construction reduced the number of trades involved in the exterior skin, which reduced the number of costly handoffs or transitions,â says Sloane. âIt also reduced the number of layers on the exterior from five to two.â That means no metal studs, sheathing, or vapor barrier; just the concrete panel and insulation. Sloane says going with tilt-up saved $8/sf over traditional masonry wall construction.
But how to break up the massing so that the building wouldnât look like a boxy warehouse? That was the problem before the design team. âWe wanted it to feel extremely invitingâa healthcare facility that you would actually want to go to for care,â says Rossen.
To break up the box, the team varied roofline angles and introduced glass curtain wall, storefront windows, wood and metal accents, and vertical reveals in the concrete panels.
To create the âinvitingâ interior, Rossen says the team brought the concrete panel reveals and exposed wood elements inside to complete the custom, modern look.
Several other âaffordable eleganceâ measures were employed on the project, including the use of mostly off-the-shelf floor tile that was installed in a staggered pattern in the main entry area and stairway for a custom aesthetic; wood-pattern vinyl flooring in lieu of more costly flooring products; and naturally finished local western red cedar instead of hardwoods like ipe or teak.
These are the kinds of low-cost, value-added solutions Building Teams are going to have to provide if they expect to succeed in the outpatient facility market.
To break up the massing of the tilt-up concrete box, the design team incorporated wood and metal accents and vertical reveals in the concrete panels. Using tilt-up cut the number of layers in the building envelope from five to two, thereby saving $8/sf over traditional masonry construction. Photo: Benjamin Benschneider
Â
[pagebreak]
5. Watch for healthcare providers to put you on a âLeanâ diet.
Â
Exposed wood elements were also used in the interior of the Everett Clinic project to create a warm, modern design aesthetic. Photo: Benjamin Benschneider
Â
A growing number of healthcare organizations are turning to so-called Lean principles as a means to increase efficiencies and reduce cost in their day-to-day operations. The core tenets of Lean dictate that organizations identify and remove all waste in their products, services, and processesââeverything from lengthy waiting times for patients, to excessive costs for supplies and equipment, to unnecessarily long walking distances for clinicians and staff. Implementing Lean operations can involve mapping and evaluating thousands, if not hundreds of thousands, of processes for continual improvement.
Because the design, construction, operation, and maintenance of facilities all play a major role in these Lean efforts, healthcare clients will be looking to their Building Teams to take part in their Lean efforts on new construction projects. This requires a deeper level of team collaboration much earlier in the planning process than some AEC firms may be accustomed to. In some cases, it may be the clientâs first foray into applying Lean principles toward facilities construction, thus adding yet another level of difficultly for you to deal with.
âWeâre seeing that across the board for projects in our area,â says Rossen. âHealthcare groups that have implemented Lean in their operations are now using it to drive the design and construction on their new facilities. And weâre at that moment in history where most clients havenât done this before for a new building.â
As a result, clients are relying on their AEC firms to facilitate the Lean process for the project, so be prepared to know your stuff. This may include facilitating integrated design events and building full-scale mockups to get input not only from your Building Team partners but also from patients, staff, and facility operations professionals. And if the client is not fully committed to Lean, expect a rocky road, says Rossen.
âWe get RFPs all the time that ask about how much Lean experience we have and if we can facilitate the process,â she says. âYou want the clients to own the process and be fully committed to it.â
There is also the potential for conflict between Lean and evidence-based design. âLean requires a highly flexible environment,â says Rossen. âSo how do you create a high degree of flexibility while maintaining the healing qualities of evidence-based design?â
For example, applying Lean principles in an outpatient clinic could mean having no cabinets on the wallââall exam-room supplies would have to be housed in a mobile cart, and all clinician tools would be out in the open. Such an arrangement could be considered a violation of EBD principles.
To solve this conundrum, the Building Team on the Smokey Point Medical Center specified integrated systems furniture with a mix of demountable partitions and tables and chairs that makes it easy to reconfigure exam room spaces.
The same approach was applied in the main lobby, where the front desk and check-in areas use demountable partitions and systems furniture instead of permanent construction. âThe trick is to make it not look like a workstation that was designed for an office building,â says Rossen.
Related Stories
Construction Costs | Apr 18, 2024
New download: BD+C's April 2024 Market Intelligence Report
Building Design+Construction's monthly Market Intelligence Report offers a snapshot of the health of the U.S. building construction industry, including the commercial, multifamily, institutional, and industrial building sectors. This report tracks the latest metrics related to construction spending, demand for design services, contractor backlogs, and material price trends.
MFPRO+ New Projects | Apr 16, 2024
Marvel-designed Gowanus Green will offer 955 affordable rental units in Brooklyn
The community consists of approximately 955 units of 100% affordable housing, 28,000 sf of neighborhood service retail and community space, a site for a new public school, and a new 1.5-acre public park.
Construction Costs | Apr 16, 2024
How the new prevailing wage calculation will impact construction labor costs
Looking ahead to 2024 and beyond, two pivotal changes in federal construction labor dynamics are likely to exacerbate increasing construction labor costs, according to Gordian's Samuel Giffin.
Healthcare Facilities | Apr 16, 2024
Mexicoâs âpremier private academic health centerâ under design
The design and construction contract for what is envisioned to be âthe premier private academic health center in Mexico and Latin Americaâ was recently awarded to The Beck Group. The TecSalud Health Sciences Campus will be located at Tec De Monterreyâs flagship healthcare facility, Zambrano Hellion Hospital, in Monterrey, Mexico.
Market Data | Apr 16, 2024
The average U.S. contractor has 8.2 months worth of construction work in the pipeline, as of March 2024
Associated Builders and Contractors reported today that its Construction Backlog Indicator increased to 8.2 months in March from 8.1 months in February, according to an ABC member survey conducted March 20 to April 3. The reading is down 0.5 months from March 2023.
Laboratories | Apr 15, 2024
HGA unveils plans to transform an abandoned rock quarry into a new research and innovation campus
In the coastal town of Manchester-by-the-Sea, Mass., an abandoned rock quarry will be transformed into a new research and innovation campus designed by HGA. The campus will reuse and upcycle the granite left onsite. The project for Cell Signaling Technology (CST), a life sciences technology company, will turn an environmentally depleted site into a net-zero laboratory campus, with building electrification and onsite renewables.
Codes and Standards | Apr 12, 2024
ICC eliminates building electrification provisions from 2024 update
The International Code Council stripped out provisions from the 2024 update to the International Energy Conservation Code (IECC) that would have included beefed up circuitry for hooking up electric appliances and car chargers.
Urban Planning | Apr 12, 2024
Popular Denver e-bike voucher program aids carbon reduction goals
Denverâs e-bike voucher program that helps citizens pay for e-bikes, a component of the cityâs carbon reduction plan, has proven extremely popular with residents. Earlier this year, Denverâs effort to get residents to swap some motor vehicle trips for bike trips ran out of vouchers in less than 10 minutes after the program opened to online applications.
Laboratories | Apr 12, 2024
Life science construction completions will peak this year, then drop off substantially
There will be a record amount of construction completions in the U.S. life science market in 2024, followed by a dramatic drop in 2025, according to CBRE. In 2024, 21.3 million sf of life science space will be completed in the 13 largest U.S. markets. Thatâs up from 13.9 million sf last year and 5.6 million sf in 2022.
Multifamily Housing | Apr 12, 2024
Habitat starts leasing Cassidy on Canal, a new luxury rental high-rise in Chicago
New 33-story Class A rental tower, designed by SCB, will offer 343 rental units.Â