When it comes to floor coverings, Building Teams can select from a broad menu of products, including carpet, polished concrete, and resilient surfaces like cork, linoleum, rubber, and vinyl. In the last few years, however, luxury vinyl tile (LVT) and carpet tile have been carving out a bigger chunk of the nonresidential flooring market, especially against broadloom products. Proven performance, ease of maintenance, and design innovations are adding to their appeal for use in schools and offices, and they are making inroads into nontraditional sectors like healthcare as well.
Dean Thompson, executive director of the Resilient Floor Covering Institute, says resilient flooring has gained market share over the last several years. “In 2003, resilient flooring comprised 13.8% of the market,” Thompson says. “Now it’s up to 19%. LVT, in particular, is capturing some share from more high-cost, labor-intensive categories like ceramic and stone.”
Last year, for example, Shaw Contract Group formed a partnership with LG Hausys to distribute LG’s resilient products. The reason was easy to understand: “The LVT segment has been growing,” says Reesie Duncan, creative director for the group.
Advances in printing technologies, Thompson says, “are bringing great new organic-type visuals to the products.” For example, some LVT products can now simulate grout lines, tumbled edges, and other details that mimic natural stone.
Sustainability remains the overarching theme with commercial flooring. FloorScore, a green rating system for floor coverings, was developed by RFCI and Scientific Certification Systems (SCS) to test and certify flooring products for compliance with indoor air quality emission requirements adopted in California. A year ago, a new ANSI standard for resilient flooring was released. As a result of these developments, manufacturers have been eager to certify their products and introduce recycling programs.
Designers are responding to the industry’s sustainability message. “We really try to go with the greenest alternative with any type of flooring,” says Kristen Beighey, LEED AP, an interior designer in the Dallas office of Perkins+Will. Beighey says the firm had been specifying a lot of vinyl composition tile (VCT), but recently switched over to Armstrong’s Biobased Tile, which is made with rapidly renewable, U.S.-grown plant materials and emits a low level of volatile organic compounds.
“A few years ago, the resilient industry was focused on a single attribute: indoor air quality,” Thompson says. “Now, like other industries such as furniture and wall coverings, we’re moving toward more full-fledged, life cycle-assessment thinking.”
Out with the rug, in with the tile
Like many in the flooring industry, Shaw’s Duncan is enthusiastic about the growth potential of carpet tile. In 2008, carpet tile represented only 40% of Shaw Contract Group’s annual sales; last year, carpet tile weighed in at 60%. “As the price of carpet tile becomes more competitive and manufacturers are pushed to look at the minimum amount of material they put into their products, tile has become the commercial carpet of choice in the architect’s and designer’s world,” says Duncan.
Duncan says the ease of installation, elimination of downtime in the workplace, and creative freedom offered by carpet tile has made it the number one flooring choice in the corporate sector. It’s been an especially big hit with multinational corporations, in part because it’s easier to ship than broadloom.
Product innovation over the last three years has allowed designers to mix patterns and colors in creative ways, says Duncan. With office layouts being defined less and less by walls and partitions, flooring can be used to delineate collaborative workspaces and add punches of color to raise the energy level of office workers.
Another sector where carpet tile is gaining attention is education, especially the K-12 market. “Maintenance is usually the biggest factor for schools,” Duncan says. “They need something that’s easy to clean. If there’s a stain that won’t come out, they can just replace the tile.”
LVT broadens its scope
Meanwhile, LVT is expanding beyond its traditional use in retail to reach into healthcare and education. Julia Pierce, director of commercial product marketing and design for Armstrong, says hospitals and clinics centers are mixing and matching LVT designs in lobbies, while schools are putting down wood-look LVT in the corridors. “It looks less institutional,” says Pierce.
RFCI’s Thompson also notes that the healthcare and education sectors have remained active. “Resilient flooring penetrates at a higher level in those segments than in some of the other categories, just because of the end uses,” he says. “There are a lot of high-performance, active areas that need the advantages of a resilient floor.” Manufacturers have improved the finish levels of resilient flooring to reduce the amount of required maintenance.
For the renovation of the Medical Center of Plano, Texas, Perkins + Will’s Beighley specified LVT flooring because “it holds up well in the healthcare environment,” she says. “It’s a no-wax floor, so it’s easy to maintain.”
But there is also potential for growth in nontraditional floor coverings such as quartz tile. The Miraton line from Hanwha Surfaces was recently installed in the Atlanta Hartsfield-Jackson Airport terminals because of its durability and numerous color options, says Lisa Herreth, product designer and marketing specialist for Hanwha. Several color options in the Miraton line are made up of recycled components and are SCS-certified.
Herreth notes that floor tiles are finding new uses and are even moving up the walls. “Thinner floor tiles are being manufactured for application to walls and vertical surfaces, creating a cohesive, seamless design,” she says. BD+C
Check slab for moisture before installing the flooring Would you rather pay $2,500 to pre-test your building’s concrete slab for moisture, or spend hundreds of thousands of dollars to replace the flooring when it starts blistering and peeling away? Unfortunately, many developers, architects, and contractors skip the testing and take their chances, says Lee Eliseian, founder and CEO of Independent Floor Testing & Inspection (IFTI) in Concord, Calif. Only after suffering through a flooring or coating failure do they adopt the practice of pre-installation moisture testing, he says. IFTI tests interior concrete slabs for moisture prior to the installation of floor coverings or coatings. “We do an analysis and report on the conditions of the slab and how it could affect the moisture-sensitive finishes that will be installed,” he says. “We also provide a forensic service after a flooring failure, to get at the root cause of the problem.” Problems usually become apparent within months after the floor covering or coating is installed. The flooring doesn’t stay bonded to the concrete substrate and may start to breach, allowing cleaning solution to seep underneath and worsen the damage. “Imagine the cost to a hospital that has to shut down an operating room in order to fix a slab moisture problem and replace the newly installed flooring,” says Eliseian. Slab pre-testing can give retailers an edge when they’re moving into buildings that have been vacated by other tenants. “We come in as part of a due diligence process during the lease negotiation, to get a good benchmark of what the slab moisture conditions are,” he says. “If adverse conditions are identified, they can decide early on who is going to shoulder the cost of slab moisture mitigation.” |
Rubber Flooring Rules in Nebraska Hospital There was no question that Doris Witte, EDAC, NCIDQ, senior interior designer for HDR Architecture in Omaha, Neb., would use rubber flooring for the Nebraska Medical Center’s adult intensive-care unit. “It’s one of the hospital’s standards,” says Witte, who selected several nora products for the project. Two colors of noraplan environcare sheet product, cut into a larger oval, were used in patient rooms, while darker, solid oval strips of norament strada were used in the corridors. “We wanted to highlight the nursing modules to visually shorten and break up the length of the corridor, so we used an oval inset with the strada product,” she says. Rubber flooring was chosen for its functionality as well as its beauty. “With rubber, you get better acoustical control than you do with some of the other sheet goods on the market,” Witte says. “And the biggest draw is that you can just polish it. You never have to strip off wax and re-wax it. So the life cycle cost of rubber flooring goes down the longer it’s in use.” |
Related Stories
| Sep 30, 2011
Design your own floor program
Program allows users to choose from a variety of flooring and line accent colors to create unique floor designs to complement any athletic facility.
| Sep 20, 2011
Jeanne Gang wins MacArthur Fellowship
Jeanne Gang, a 2011 MacArthur Fellowship winner described by the foundation as "an architect challenging the aesthetic and technical possibilities of the art form in a wide range of structures."
| Aug 19, 2011
How and why AEC professionals choose flooring systems
Design and construction professionals who completed our flooring survey had strong opinions about their preferred flooring type.
| Aug 19, 2011
Underfloor air distribution, how to get the details right
Our experts provide solid advice on the correct way to design and construct underfloor air distribution systems, to yield significant energy savings.
| Aug 19, 2011
Enhanced acoustical design
Ambient noise levels in some facility types are trending up and becoming a barrier to clear communication between building occupants.
| Mar 21, 2011
Forget planks, new hardwood floors follow tree's curves
Bolefloor offers floorboards, cut using custom algorithms, that follow the natural warp and weft of trees.
| Oct 13, 2010
Prefab Trailblazer
The $137 million, 12-story, 500,000-sf Miami Valley Hospital cardiac center, Dayton, Ohio, is the first major hospital project in the U.S. to have made extensive use of prefabricated components in its design and construction.
| Oct 13, 2010
Biloxi’s convention center bigger, better after Katrina
The Mississippi Coast Coliseum and Convention Center in Biloxi is once again open for business following a renovation and expansion necessitated by Hurricane Katrina.
| Aug 11, 2010
New data shows low construction prices may soon be coming to an end
New federal data released recently shows sharp increases in the prices of key construction materials like diesel, copper and brass mill shapes likely foreshadow future increases in construction costs, the Associated General Contractors of America said. The new November producer price index (PPI) report from the Bureau of Labor Statistics provide the strongest indication yet that construction prices are heading up, the association noted.
| Aug 11, 2010
LEED 2009 cites FloorScore Certification as indicator of indoor air quality
The U.S. Green Building Council (USGBC) has cited FloorScore® certified flooring products as eligible for credits under the new LEED 2009 Version 3 guidelines. Reflecting the inclusion of FloorScore, the new LEED IEQ Credit 4.3 for Low-Emitting Materials has been expanded from “Carpet Systems” to “Flooring Systems” to include hard surface flooring.