The AEC industry has made incredible advancements with parametric modeling during the past 25 years, but the BIM/VDC movement is still relatively in its infancy. Technology gaps, interoperability issues, antiquated project delivery methods, and liability concerns are among the barriers preventing the industry from achieving the full power of BIM/VDC tools on building projects.
A prime example is the promise of true multi-discipline, multi-location, real-time collaboration using a single project model. Sure, the technological capability to do so has been available for several years, but for a host of reasonsâfrom a lack of technical know-how to contractual nitpicksâfew Building Teams have taken BIM/VDC coordination to this level. Weâre starting to see more Building Teams co-locate for the duration of projectsâespecially for complex, multi-year projects, like hospitals and government buildingsâto improve coordination efforts. But what about virtual co-location?
Thatâs the promise of âBIM in the cloud,â where project models are hosted virtually to permit multiple project team members in different locations to work on the same model in real time, as if they were in the same room. The major BIM software playersâas well as a handful of progressive AEC firms and cloud solution providers, like Citrix, Panzura, and VMWareâhave been scrambling the past few years to develop cloud-based BIM solutions. Autodesk, Bentley, Graphisoft, Nemetschek, and Trimble all offer cloud products and services, and encouraging AEC firms to shift to cloud-centric workflows.
âIn an ideal world, everyone would be in one office and working off the same network, but thatâs just not the reality of how design and construction work today,â says Bjorn Clouten, AIA, Senior Associate/BIM Manager with SRG Partnership. âCloud-based modeling is critically needed for the industry. Itâs something that weâve been pushing for over the past decade.â
During his 11 years heading SRGâs BIM efforts, Clouten has implemented and experimented with a number of cloud-based modeling approaches, with mixed success. The firm recently beta-tested Autodeskâs newly launched A360 Collaboration for Revit cloud platform for the design coordination of the planned Oregon State Capital Renovation in Salem. The cloud platform allowed a significant portion of the design team, including SRGâs team and designers from the associate architect, structural engineer, MEP engineer, and low-voltage engineer, to coordinate in real time on a single Revit model.   Â
Besides the improved coordination and time savings from not having to exchange models once a week, this technology simplified the process âconsiderablyâ by eliminating the need to do workarounds, says SRGâs Clouten. âWe have the current information all the time, so weâre not always two weeks behind on the design information.â
Â
5 lessons from moving BIM to the cloud
Like any emerging technology, cloud-based modeling has nuances that can be nettlesome for firms that are new to the process. BD+C asked several early cloud adopters to share their lessons and takeaways. They offered the following:
1. Get ready for a change in workflow. Same model, same users, whatâs the difference? For starters, giving multiple users real-time access to the model can lead to logistical problems if the process is not properly managed. âCommunication becomes even more critical,â says Seth Spangler, PE, LEED AP BD+C, BEMP, Project Manager with RMF Engineering. âArchitects are moving walls and ceilings at the same time engineers are placing diffusers and lights. These same adjustments can have catastrophic effects if the model or families are not configured properly.â
The need for a cohesive BIM execution plan is greater than ever, says Thom Chuparkoff, AIA, LEED AP, Associate with Populous. âThe BIM plan should provide a clear understanding of factors like model exchanges, storage, naming conventions, and organization of the model,â he says. âThis will allow for a seamless inclusion of models throughout the life of the documentation process.â
2. Communication is more critical than ever. Chuparkoff recommends at least weekly coordination meetings. Depending on whatâs being worked on, coordination could involve daily, hourly, or even âreal-timeâ check-ins with multiple team membersâas if they were physically co-located.
âCollaboration is synonymous with communication,â says Chuparkoff. âYour new workflow involves a form of partnership with your consultants that is akin to integrated project delivery.â
3. Outsource your cloud infrastructure to avoid added costs and headaches. Sean McDonald, Senior Information Technology Specialist with BIM consultant CASE, has seen a number of firms get into trouble developing their own cloud infrastructure.
âThese projects start off the same way: âLetâs just buy a server rather than pay all these monthly fees,ââ says McDonald. âBut there are a number of hidden costs that most firms donât see until itâs too late.â
Licenses for server software can be âoutrageously expensive,â he says, and clouds are labor intensiveââespecially if you consider that any down time will potentially prevent your entire firm from working.â
4. Cloud solutions can be IT-intensive. Depending on the approach, the level of IT expertise required for cloud solutions can be extensive. For example, implementing Autodeskâs Revit Server between two firms requires a relatively high level of expertise to be able to enter the IP addresses, configure VPNs, and work with firewalls, says SRG Partnership's Clouten. On the other hand, he says Autodeskâs A360 Collaboration for Revit is much simpler, requiring the installation of a few plug-ins.
Clouten advises firms to make sure that all BIM cloud users are equipped with a workstation and broadband service robust enough to handle very large BIM files. Cloud applications are similar to how BIM workflows operate within a local network. âYou have the central copy in the cloud and the local copy on the hard drive,â he says. âLocal storage space is an item to be aware of.â
5. The cloud can be temperamental, so be patient. Server problems, syncing delays, broadband hiccupsâthese are just a few of the ongoing headaches reported by the AEC cloud experts. Donât expect uptime to be 100%ânot even Google can claim to offer that level of reliabilityâand have a backup plan for when your connections are down.
Related Stories
Energy Efficiency | Aug 24, 2015
Google develops Google Maps for solar energy
The tool offers high-resolution aerial maps, like the one used in Google Earth, to estimate the total sunlight a rooftop receives throughout the year.
Sponsored | BIM and Information Technology | Aug 20, 2015
Part II - Will BIM Work as a Deliverable? A Legal Perspective on BIM
Having the right counsel on your team can be the difference between long drawn-out negotiations and breaking new ground to meet the ownerâs needs.
BIM and Information Technology | Aug 17, 2015
Reimagined cursors can change digital imaging
A University of Montreal professor has developed a system that elevates 2D cursors for a 3D world.
BIM and Information Technology | Aug 6, 2015
After refueling its capital tank, WeWork acquires BIM consultant Case
The merger is expected to help standardize how WeWork designs and builds out office space.Â
Giants 400 | Aug 6, 2015
BIM GIANTS: Robotic reality capture, gaming systems, virtual realityâAEC Giants continue tech frenzy
Given their size, AEC Giants possess the resources and scale to research and test the bevy of software and hardware solutions on the market. Some have created internal innovation labs and fabrication shops to tinker with emerging technologies and create custom software tools. Others have formed R&D teams to test tech tools on the job site.
Smart Buildings | Aug 5, 2015
8 cities win Bloomberg's 'open data' award
The competition, called "What Works Cities," promotes innovation in city government by making the massive amounts of city operations data more publicly accessible to better improve issues like job creation, public health, and blight.Â
Multifamily Housing | Aug 5, 2015
FacadeRetrofit.org: A new database for tracking commercial and multifamily façade upgrades
The site allows users to submit information about new projects, or supplement information on those already posted.
BIM and Information Technology | Aug 4, 2015
Augmented reality app provides step-by-step help for repairing equipment
The developers of Remote AR have discovered a new application for AR technology that could apply to all types of industries, including commercial buildings.
BIM and Information Technology | Jul 29, 2015
Tenn. startup uses freeform 3D printer to build full-size walls
Branch Technology used the worldâs largest freeform printer, one that has an arm that prints objects in open space, to make the lightweight yet incredibly sturdy lattice structures.
University Buildings | Jul 21, 2015
Maker spaces: Designing places to test, break, and rebuild
Gensler's Kenneth Fisher and Keller Roughton highlight recent maker space projects at MIT and the University of Nebraska that provide just the right mix of equipment, tools, spaces, and disciplines to spark innovation.Â