After being pressured to scale back efficiency provisions in the 2018 International Energy Conservation Code (IECC), code officials largely held the line on efficiency gains made in recent versions, according to Lauren Urbanek, Senior Energy Policy Advocate, Energy & Transportation program with the Natural Resources Defense Council.
“The building code was under attack at every step of this year-long process,” Urbanek writes. “There were many proposals that would have significantly weakened the code and allowed more opportunities for energy waste, but nearly all were defeated.”
Urbanek noted just one efficiency gain in the new commercial code—one that pertains to water flow in showers. It sets the maximum flow rate of showerheads in commercial buildings at 2.0 gallons per minute, the level that has been specified by the EPA Water Sense program since 2010.
The IECC is used as a model code by more than 40 states. It is updated every three years.
A home built to the 2012 code uses about half of the energy as a standard home constructed in 1975, according to Urbanek.
Related Stories
Resiliency | Sep 30, 2022
Designing buildings for wildfire defensibility
Wold Architects and Engineers' Senior Planner Ryan Downs, AIA, talks about how to make structures and communities more fire-resistant.
| Sep 30, 2022
Lab-grown bricks offer potential low-carbon building material
A team of students at the University of Waterloo in Canada have developed a process to grow bricks using bacteria.
| Sep 27, 2022
New Buildings Institute released the Existing Building Decarbonization Code
New Buildings Institute (NBI) has released the Existing Building Decarbonization Code.
| Sep 22, 2022
Gainesville, Fla., ordinance requires Home Energy Score during rental inspections
The city of Gainesville, Florida was recently recognized by the U.S. Dept. of Energy for an adopted ordinance that requires rental housing to receive a Home Energy Score during rental inspections.
| Sep 19, 2022
New York City construction site inspections, enforcement found ‘inadequate’
A new report by the New York State Comptroller found that New York City construction site inspections and regulation enforcement need improvement.
| Sep 16, 2022
Fairfax County, Va., considers impactful code change to reduce flood risk
Fairfax County, Va., in the Washington, D.C., metro region is considering a major code change to reduce the risk from floods.
| Sep 13, 2022
California building codes now allow high-rise mass-timber buildings
California recently enacted new building codes that allow for high-rise mass-timber buildings to be constructed in the state.
| Sep 8, 2022
U.S. construction costs expected to rise 14% year over year by close of 2022
Coldwell Banker Richard Ellis (CBRE) is forecasting a 14.1% year-on-year increase in U.S. construction costs by the close of 2022.
| Aug 29, 2022
Montana becomes first U.S. state to approve 3D printing in construction
Montana is the first U.S. state to give broad regulatory approval for 3D printing in building construction.
| Aug 25, 2022
New York City’s congestion pricing aims to reduce traffic, cut carbon
Officials recently released an environmental assessment that analyzes seven different possible pricing schemes for New York City’s congestion pricing program.
