After being pressured to scale back efficiency provisions in the 2018 International Energy Conservation Code (IECC), code officials largely held the line on efficiency gains made in recent versions, according to Lauren Urbanek, Senior Energy Policy Advocate, Energy & Transportation program with the Natural Resources Defense Council.
“The building code was under attack at every step of this year-long process,” Urbanek writes. “There were many proposals that would have significantly weakened the code and allowed more opportunities for energy waste, but nearly all were defeated.”
Urbanek noted just one efficiency gain in the new commercial code—one that pertains to water flow in showers. It sets the maximum flow rate of showerheads in commercial buildings at 2.0 gallons per minute, the level that has been specified by the EPA Water Sense program since 2010.
The IECC is used as a model code by more than 40 states. It is updated every three years.
A home built to the 2012 code uses about half of the energy as a standard home constructed in 1975, according to Urbanek.
Related Stories
Codes and Standards | Jul 12, 2017
New International Building Code allows weather-resistive barriers above 40 feet
Danger of propagating flames now deemed negligible.
Codes and Standards | Jul 10, 2017
New mass plywood panel project moves ahead with federal grant
New material is substitute for concrete and steel in multi-story projects.
Codes and Standards | Jul 6, 2017
Trump ups ante on apprenticeships, gives private sector more room to design them
Initiative aimed at alleviating construction industry worker shortage.
Codes and Standards | Jul 6, 2017
Flawed modeling to blame for green buildings failure to live up to hype on energy efficiency
Explains energy performance gap from expected savings to actual savings.
Codes and Standards | Jul 5, 2017
Research study examines tall timber buildings worldwide
Industry group developing criteria for categorizing wide range of construction approaches to tall timber buildings.
Codes and Standards | Jun 30, 2017
AAMA releases new document on aluminum fenestration and energy efficiency
The free download addresses entrances, storefront framing, curtain walls, windows and skylight fenestration systems.
Codes and Standards | Jun 29, 2017
Fire codes prevent cladding used on Grenfell Tower from being used in U.S.
Reports suggest an extra $6,300 for fire-resistant cladding could have prevented the tragedy.
Codes and Standards | Jun 28, 2017
Minimum Design Loads and Associated Criteria for Buildings and Other Structures, Standards ASCE/SEI 7-16, has been updated
The document is used for determining design loads including dead, live, soil, flood, tsunami, snow, rain, atmospheric ice, earthquake, wind, and fire.
Codes and Standards | Jun 27, 2017
Cold-formed steel framing engineering guide for building projects released
Better sound attenuation for subfloors and exterior continuous insulation are among the matters addressed.
Codes and Standards | Jun 26, 2017
L.A.’s new ordinance requires energy and water efficiency benchmarking
Structures 20,000 sf and larger must demonstrate steps to boost efficiency.